Event updates for November 2023
Drone Pilot (FAA 107 UAS) Class
Time: Nov 04 09:00 AM - 03:00 PMHost: Randy Reynard
Register: http://makeict.wildapricot.org/event-5428124
Price: MakeICT Members - $40.00
Price: Non-Members - $45.00
Ages: 16 and up
The class will be taught by an FAA Certified Flight and Advanced Ground Instructor. It will provide training needed to pass the FAA Drone Pilot (FAA 107) written exam which is required to fly a drone for any other than strictly personal use.
This series of three classes will consist of approximately 16 hours of classroom instruction and an optional "Drone Fly-In" at another site to be determined by the class.
The class schedule is:
Saturday, November 4th: 9AM-4PM with a lunchtime break
Wednesday, November 8: 6-10 PM
Saturday, November 11th: 9AM-4PM with a lunchtime break
Cost for the class will be $40 for MakeICT members and $45 for non-members.
Materials will be provided in the form of "soft copies" of various FAA and other subject related documents. Students will receive the materials when they register.
This is the first of 3 sessions of the class. Register for this session.
Drone Pilot (FAA 107 UAS) Class
Time: Nov 11 09:00 AM - 03:00 PMHost: Randy Reynard
Register: http://makeict.wildapricot.org/event-5428126
Price: MakeICT Members - $40.00
Price: Non-Members - $45.00
Ages: 16 and up
The class will be taught by an FAA Certified Flight and Advanced Ground Instructor. It will provide training needed to pass the FAA Drone Pilot (FAA 107) written exam which is required to fly a drone for any other than strictly personal use.
This series of three classes will consist of approximately 16 hours of classroom instruction and an optional "Drone Fly-In" at another site to be determined by the class.
The class schedule is:
Saturday, November 4th: 9AM-4PM with a lunchtime break
Wednesday, November 8: 6-10 PM
Saturday, November 11th: 9AM-4PM with a lunchtime break
Cost for the class will be $40 for MakeICT members and $45 for non-members.
Materials will be provided in the form of "soft copies" of various FAA and other subject related documents. Students will receive the materials when they register.
This is the third of 3 sessions of the class. Register for the first session on 11/4. DO NOT REGISTER FOR THIS SESSION!! All 3 sessions will be required to receive the full course information
New Member Orientation
Time: Nov 21 06:00 PM - 08:30 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-5464243
Price: MakeICT Members - $0.00
New Member Orientation sessions are required for all new members and exist to familiarize you with the building and the organization. To qualify for this session, you must fit the following requirements:
- Membership profile completed and approved
- Waiver Signed
- Payments are all current
This session will including a short slideshow about MakeICT and then an in-depth tour of the facility. Members will also sit down with a number of leadership and peer members for a brief discussion to allow us to get to know you. At the end of this session, you will get your key to the building so that you can come and go as you please.
https://makeict.wildapricot.org/Sys/Login
Maker Monday
Time: Nov 13 07:00 PM - 08:30 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-5464282
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Maker Monday is our open house event. It’s a great way to experience the makerspace and the maker culture in person. You’ll learn all about our space, tools, policies, people, and how we operate.
Our tours are free and open to the public. While you are welcome to just show up, we prefer that you register in advance so we have enough members on hand to assist with our tours.
You are welcome to hang out and chat after your tour. There’s always something interesting going on at Maker Monday!
To contact our Membership Committee to arrange a tour outside of Maker Mondays, or if you have general questions about joining, send an email to membership@makeict.org.
Maker Monday
Time: Nov 27 07:00 PM - 08:30 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-5464283
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Maker Monday is our open house event. It’s a great way to experience the makerspace and the maker culture in person. You’ll learn all about our space, tools, policies, people, and how we operate.
Our tours are free and open to the public. While you are welcome to just show up, we prefer that you register in advance so we have enough members on hand to assist with our tours.
You are welcome to hang out and chat after your tour. There’s always something interesting going on at Maker Monday!
To contact our Membership Committee to arrange a tour outside of Maker Mondays, or if you have general questions about joining, send an email to membership@makeict.org.
New Member Orientation
Time: Nov 11 02:00 PM - 04:30 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-5464231
Price: MakeICT Members - $0.00
New Member Orientation sessions are required for all new members and exist to familiarize you with the building and the organization. To qualify for this session, you must fit the following requirements:
- Membership profile completed and approved
- Waiver Signed
- Payments are all current
This session will including a short slideshow about MakeICT and then an in-depth tour of the facility. Members will also sit down with a number of leadership and peer members for a brief discussion to allow us to get to know you. At the end of this session, you will get your key to the building so that you can come and go as you please.
https://makeict.wildapricot.org/Sys/Login
Make a Cat Platter
Time: Nov 05 02:00 PM - 04:00 PMHost: Michelle Le Favor
Register: http://makeict.wildapricot.org/event-5468554
Price: MakeICT Members - $20.00
Price: Non-Members - $25.00
Ages: 10 and up
This is a easy class for all skill levels. We will make a decorative platter of a cat that you can keep or give as a gift. All profit for my class is donated back to ceramics to help purchase much needed equipment and supplies.
$20 if prepaid online $30 Day of class
Laser Cutting Basics
Time: Nov 02 06:00 PM - 08:00 PMHost: Kim Burton
Register: http://makeict.wildapricot.org/event-5456549
Price: MakeICT Members - $20.00
Price: Non-Members - $25.00
This class will teach participants how to use the 80 watt CO2 laser cutters at MakeICT. We will be using Inkscape and LightBurn software to create and cut a simple project.
Participants will learn the capabilities of the laser cutter, machine and material safety, and operation of the machine in Cartesian (flat) mode. All participants will complete a small project to practice running the machine. Intermediate computer proficiency is recommended. Users should be comfortable with web browsing, Windows file folder navigation, copy and paste shortcut keys, and mouse operation.
Open IT Workshop
Time: Nov 07 06:30 PM - 08:30 PMHost: David Lin
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 16 to 99
Come talk tech! IT professionals, hobbyists, and those looking for information and help are welcome to come to our open IT workshop. Discuss the latest in technology and enjoy a short lecture on the topic of the day.
Woodshop Authorization
Time: Nov 04 11:00 AM - 02:00 PMHost: Aaron Rivers
Register: http://makeict.wildapricot.org/event-5471148
Price: MakeICT Members - $0.00
Price: Non-Members - $20.00
Learn the basics to safely operate the major woodshop tools in this safety class including understanding the limitations of each tool, the forces created when using the tool and how to maintain safe control for improved performance. Tools covered: SawStop table saw, drill press, band saw, router table, jointer, planer, miter saw, oscillating spindle and belt / disk sanders and scroll saw. Expect at least two hours of walkthrough with our tools and equipment, followed by an OPTIONAL hour of hands on practice with the tools aimed at those who have little or no practice with woodworking tools
Prerequisites: Please read the woodshop tool access policy and safety requirements on the wiki page prior to coming to class. Safety Personal Protective Equipment (PPE): • Mandatory: Closed-toed shoes, eye protection, short sleeves • Advisable: Hearing protection
Upon completion of the safety demonstration you can use this woodshop equipment for your projects whenever you work at MakeICT as a member!
1 Like
Woodshop Hazardous Materials Authorization
Time: Nov 04 03:00 PM - 05:00 PMHost: Aaron Rivers
Register: http://makeict.wildapricot.org/event-5471149
Price: MakeICT Members - $0.00
Price: Non-Members - $5.00
Ages: 16 and up
Learn to use exotic materials safely in our shared space. Participants will learn how to clean re-claimed wood, test for lead paint, and adequately clean up after the use of exotic woods. Once authorized, participants will be allowed to use exotic woods in the woodshop at any time. Expect to get dirty. Participants are encouraged to bring respirators if they have one, though dust masks will be provided.
*This CAN be taken before being authorized for the woodshop, though the use of the tools in the space would still require Woodshop Authorization..
Woodshop Workshopping
Time: Nov 13 07:00 PM - 10:00 PMHost: Aaron Rivers
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 16 to 99
Come talk shop!
Every Maker Monday we'll be discussing any and all Woodshop issues, projects, and goals at these recurring meetings, afterwards we'll engage in projects and cleaning.
You may very well be asked to volunteer.
Plans will be made, and the excellence will be undeniable.
Woodshop Authorization
Time: Nov 16 03:00 PM - 06:00 PMHost: Aaron Rivers
Register: http://makeict.wildapricot.org/event-5471150
Price: MakeICT Members - $0.00
Price: Non-Members - $20.00
Learn the basics to safely operate the major woodshop tools in this safety class including understanding the limitations of each tool, the forces created when using the tool and how to maintain safe control for improved performance. Tools covered: SawStop table saw, drill press, band saw, router table, jointer, planer, miter saw, oscillating spindle and belt / disk sanders and scroll saw. Expect at least two hours of walkthrough with our tools and equipment, followed by an OPTIONAL hour of hands on practice with the tools aimed at those who have little or no practice with woodworking tools
Prerequisites: Please read the woodshop tool access policy and safety requirements on the wiki page prior to coming to class. Safety Personal Protective Equipment (PPE): • Mandatory: Closed-toed shoes, eye protection, short sleeves • Advisable: Hearing protection
Upon completion of the safety demonstration you can use this woodshop equipment for your projects whenever you work at MakeICT as a member!
Woodshop Workshopping
Time: Nov 27 07:00 PM - 10:00 PMHost: Aaron Rivers
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 16 to 99
Come talk shop!
Every Maker Monday we'll be discussing any and all Woodshop issues, projects, and goals at these recurring meetings, afterwards we'll engage in projects and cleaning.
You may very well be asked to volunteer.
Plans will be made, and the excellence will be undeniable.
Woodworking 101: Milling
Time: Nov 18 01:00 PM - 05:00 PMHost: Aaron Rivers
Register: http://makeict.wildapricot.org/event-5471191
Price: MakeICT Members - $40.00
Price: Non-Members - $50.00
Ages: 16 to 99
Required Authorizations: Woodshop
In this foundational woodworking course each student will get hands-on experience taking warped and rough-sawn lumber to a straight, square, and dimensioned state ready to be used in finished pieces.
We will also consider the assessment of common defects including knots, wane, checking, cupping, bowing, twist, reaction wood and balancing structural concerns, aesthetics, and yield in lumber selection and creating cut lists.
Tools used will include the Bandsaw, Table Saw, Jointer, Planer, Moisture Meter, Metal Detector, Straight Edge, Winding sticks, Calipers, Tape Measure, Drill Driver, and possibly even a jig or two.
Students are encouraged to bring up to three pieces of their own warped or difficult lumber for processing.
One-Color Screen Printing
Time: Nov 06 06:00 PM - 08:00 PMHost: Doug Wilson
Register: http://makeict.wildapricot.org/event-5472757
Price: MakeICT Members - $15.00
Price: Non-Members - $20.00
Ages: 10 and up
This class will focus on the basics of screen-printing; from choosing a design, exposing a screen, washing out the stencil, and applying the ink to paper. Participants will get the opportunity to practice good screen printing technique by helping to produce a run of 50 wall-worthy prints.
We'll also answer any curiosities you might have regarding multi-color printing, printing on cloth, and obtaining and using other people's artwork.
1 Like
ShopBot CNC Using Easel
Time: Nov 19 04:00 PM - 07:00 PMHost: Doug Wilson
Register: http://makeict.wildapricot.org/event-5472766
Price: MakeICT Members - $25.00
Price: Non-Members - $30.00
Ages: 16 and up
Required Authorizations: Woodshop
This class is for those interested in using the CNC ShopBot in the woodshop. During the class, students will design a wooden ring on Easel.com and carve out said ring on the ShopBot. Carving on the ShopBot is quick and accurate, so each person will have the chance to operate the ShopBot themselves and take home a small token of their hard work.
Metal Lathe Basics
Time: Nov 18 09:00 AM - 10:30 AMHost: Rustin Atkeisson
Register: http://makeict.wildapricot.org/event-5472919
Price: MakeICT Members - $19.00
Price: Non-Members - $24.00
Ages: 16 and up
Required Authorizations: Metalshop
Metal Lathe Basics will cover the basic parts of the metal lathe while also going thru the proper use and operation of the Craftsman and Logan metal lathes.
The end project will include basic operations such as facing and parting as well as knurling and adding internal threading.
Safety glasses are required.
Manual Milling Basics
Time: Nov 18 12:00 PM - 02:30 PMHost: Rustin Atkeisson
Register: http://makeict.wildapricot.org/event-5472920
Price: MakeICT Members - $24.00
Price: Non-Members - $29.00
Ages: 16 and up
Required Authorizations: Metalshop
Manual Mill Basics will cover the basic parts of a manual mill while also going thru proper use and operation of the EMCO manual mill.
The end project will include basic operations such as facing, squaring, drilling, and counter boring.
Safety glasses are required.
Metalshop Safety must be completed before signing up for this class.