Event updates for November 2022
Woodturning: Maker Monday Edition
Time: Nov 28 06:30 PM - 08:30 PMHost: John Nicholas
Register: http://makeict.wildapricot.org/event-5007617
Price: MakeICT Members - $10.00
Price: Non-Members - $15.00
Ages: 12 to 100
Makers should make things on Maker Monday. Turn something simple to find out what woodturning is about.
We will have several experienced woodturners, Members of South Kansas Woodturners, available. This week we will turn a small bowl. Join our Guest Instructor Bill Oden, President of SKW.
We wear Protective Face Shields (Safety) when turning. Dust or Cloth Masks are optional.
Kid Friendly, requires Parent with those under 16.
This exploring Woodturning Class does not qualify for Level 1 Lathe Authorization.
Woodturning: Maker Monday Edition
Time: Nov 14 06:30 PM - 08:30 PMHost: John Nicholas
Register: http://makeict.wildapricot.org/event-5008427
Price: MakeICT Members - $10.00
Price: Non-Members - $15.00
Ages: 12 to 100
Makers should make things on Maker Monday. Turn something simple to find out what woodturning is about.
We will have several experienced woodturners, Members of South Kansas Woodturners, available. This week we will turn a small bowl. Join our Guest Instructor Bill Oden, President of SKW.
We wear Protective Face Shields (Safety) when turning. Dust or Cloth Masks are optional.
Kid Friendly, requires Parent with those under 16.
This exploring Woodturning Class does not qualify for Level 1 Lathe Authorization.
Member Orientation
Time: Nov 12 02:30 PM - 05:00 PMHost: JaiPal Chauhan
Register: http://makeict.wildapricot.org/event-5015196
Price: MakeICT Members - $0.00
Member Orientation sessions exist to familiarize our new members with the building and the organization. To qualify for this session, you must fit the following requirements:
- Membership profile completed and approved
- Waiver Signed
- Payments are all current
- Have completed at least one Class (Authorization or General classes accepted)
This session will including a short slideshow about MakeICT and then an in-depth tour of the facility. Members will also sit down with a number of leadership and peer members for a brief discussion to allow us to get to know you. At the end of this session, you will get your key to the building so that you can come and go as you please.
https://makeict.wildapricot.org/Sys/Login
Member Orientation
Time: Nov 22 06:00 PM - 08:30 PMHost: JaiPal Chauhan
Register: http://makeict.wildapricot.org/event-5015197
Price: MakeICT Members - $0.00
Member Orientation sessions exist to familiarize our new members with the building and the organization. To qualify for this session, you must fit the following requirements:
- Membership profile completed and approved
- Waiver Signed
- Payments are all current
- Have completed at least one Class (Authorization or General classes accepted)
This session will including a short slideshow about MakeICT and then an in-depth tour of the facility. Members will also sit down with a number of leadership and peer members for a brief discussion to allow us to get to know you. At the end of this session, you will get your key to the building so that you can come and go as you please.
https://makeict.wildapricot.org/Sys/Login
Maker Monday
Time: Nov 14 07:00 PM - 08:30 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-5015198
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Maker Monday is our open house event.
It’s a great way to experience the makerspace and the maker culture in person. Come tour our shops and see our brand new facility at 5920 E. Mt. Vernon. You’ll learn all about our makerspace, tools, policies, people, and how we operate.
Our tours are free and open to the public. While you are welcome to just show up, we prefer that you register in advance so we have enough members on hand to assist with our tours. Sessions are at 7 and 7:30.
If you wish to begin your membership at Maker Monday we will have members here to sign you up.
You are welcome to hang out and chat after your tour. There’s always something interesting going on at Maker Monday!
To contact our onboarding team to arrange a tour outside the normal ones on Maker Mondays or general questions about joining, send an email to onboarding@makeict.org.
Maker Monday
Time: Nov 28 07:00 PM - 08:30 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-5015199
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Maker Monday is our open house event.
It’s a great way to experience the makerspace and the maker culture in person. Come tour our shops and see our brand new facility at 5920 E. Mt. Vernon. You’ll learn all about our makerspace, tools, policies, people, and how we operate.
Our tours are free and open to the public. While you are welcome to just show up, we prefer that you register in advance so we have enough members on hand to assist with our tours. Sessions are at 7 and 7:30.
If you wish to begin your membership at Maker Monday we will have members here to sign you up.
You are welcome to hang out and chat after your tour. There’s always something interesting going on at Maker Monday!
To contact our onboarding team to arrange a tour outside the normal ones on Maker Mondays or general questions about joining, send an email to onboarding@makeict.org.
Laser Cutting Basics
Time: Nov 13 03:00 PM - 05:00 PMHost: Christian Kindel
Register: http://makeict.wildapricot.org/event-5015303
Price: MakeICT Members - $20.00
Price: Non-Members - $25.00
This class will teach participants how to use the 80 watt CO2 laser cutters at MakeICT. We will be using the LightBurn software to create and cut a simple project.
Participants will learn the capabilities of the laser cutter, machine and material safety, and operation of the machine in Cartesian (flat) mode. All participants will complete a small project to practice running the machine.
Please bring a USB flash drive if you have one. Completion of this class grants the necessary authorization to use the laser cutter.
1 Like
Intro To House Plants
Time: Nov 12 09:00 AM - 10:00 AMHost: Beniah Crossette
Register: http://makeict.wildapricot.org/event-5014078
Price: MakeICT Members - $10.00
Price: Non-Members - $15.00
In this intro to house plants class we will discuss Red Star caladiums and golden pathos, their different care needs, ideal soil compositions, diseases, and insects they're prone to. Along with easy ways on how to treat and care for your chlorophyll babies. Followed by a period for any questions.
There will also be an opportunity (for an additional fee) to buy some of the plants that we will be discussing.
Resin Coasters - Beginners Class (Day 1 of 2)
Time: Nov 11 06:00 PM - 08:00 PMHost: Gena Profit
Register: http://makeict.wildapricot.org/event-5020258
Price: MakeICT Members - $60.00
Price: Non-Members - $65.00
Ages: 18 and up
This class is for beginners and you will create and keep your creation. This class is two days long: Nov. 11 at 6 pm and Nov. 13 at 2 pm (Two hours long the first day and one hour long on the second day.) Review this video before class: https://youtu.be/H7u2lvylzV8
Waivers will needed prior to each class. You will pay for whole class when you sign up for the first class.
3D Printing Basics
Time: Nov 18 06:30 PM - 08:30 PMHost: Christian Kindel
Register: http://makeict.wildapricot.org/event-5015157
Price: MakeICT Members - $20.00
Price: Non-Members - $25.00
Ages: 12 and up
Learn the basics of 3D printing and how to use the printers at MakeICT!
We'll cover how 3D printing works, materials used in 3D printing, importing 3D files into slicer software, and important techniques for successful printing. Each participant will get a chance to practice with the software and print a small object to take home. Sample models will be provided, but participants may also bring in an STL file of a small (~20cm3) object to try out.
Completion of this class will grant authorization for using the 3D printers at MakeICT.
How to teach a class at MakeICT
Time: Nov 05 10:00 AM - 11:30 AMHost: LaDeana Dockery
Register: http://makeict.wildapricot.org/event-5020578
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Class for people wanting to teach a class at MakeICT. We learn how to propose a class, how to check in students, how to use the projector and answer any other questions you might have!
Resin Coasters - Beginners Class (Day 2 of 2)
Time: Nov 13 02:00 PM - 03:00 PMHost: Gena Profit
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 18 and up
This class is the second day of class.
Metalshop Safety Class
Time: Nov 15 07:00 PM - 08:00 PMHost: Rustin Atkeisson
Register: http://makeict.wildapricot.org/event-5027128
Price: MakeICT Members - $0.00
Price: Non-Members - $20.00
Ages: 16 and up
The Metalshop Safety Class will cover basic safety for working in both the Hot room and Cold room for the Metalshop at MakeICT, as well as some basic expectations. The following tools will be covered :
Pipe bender
Tubing roller
Metal shear
Large and small sheet metal brakes
Drill press
Hand grinders
Horizontal band saw
Vertical band saw
Chop Saw
Other equipment not listed may require further authorization. This class is required before taking most other metalworking classes or workshops.
Safety glasses are available but we recommend bringing your own if you can.
Metalshop Safety Class
Time: Nov 10 06:00 PM - 07:00 PMHost: Rustin Atkeisson
Register: http://makeict.wildapricot.org/event-5027130
Price: MakeICT Members - $0.00
Price: Non-Members - $20.00
Ages: 16 and up
The Metalshop Safety Class will cover basic safety for working in both the Hot room and Cold room for the Metalshop at MakeICT, as well as some basic expectations. The following tools will be covered :
Pipe bender
Tubing roller
Metal shear
Large and small sheet metal brakes
Drill press
Hand grinders
Horizontal band saw
Vertical band saw
Chop Saw
Other equipment not listed may require further authorization. This class is required before taking most other metalworking classes or workshops.
Safety glasses are available but we recommend bringing your own if you can.
Metal Lathe Basics
Time: Nov 08 07:00 PM - 08:30 PMHost: Rustin Atkeisson
Register: http://makeict.wildapricot.org/event-5027129
Price: MakeICT Members - $19.00
Price: Non-Members - $24.00
Ages: 16 and up
Required Authorizations: Metalshop
Metal Lathe Basics will cover the basic parts of the metal lathe while also going thru the proper use and operation of the Craftsman and Logan metal lathes.
The end project will include basic operations such as facing and parting as well as knurling and adding internal threading.
Safety glasses are required.
How to be an Area Lead
Time: Nov 28 07:30 PM - 08:30 PMHost: Rustin Atkeisson
Register: http://makeict.wildapricot.org/event-5027132
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 16 and up
Runs through the basics of what an area lead does as an area lead. This class is not required to become an area lead but is meant to answer any questions you may have about what an area lead does or what they are responsible for.
Topics covered but are not limited to:
-basic expectations
-volunteer/personal life balance
-wiki web page maintenance
-area maintenance and organization
-budgeting
-teaching classes
Wood Lathe Safety Authorization Class
Time: Nov 05 12:00 PM - 02:00 PMHost: John Nicholas
Register: http://makeict.wildapricot.org/event-5028407
Price: MakeICT Members - $0.00
Price: Non-Members - $20.00
Ages: 16 to 106
Required Authorizations: Woodshop
Plan on about 2 hours for the Lathe Safety Authorization Class. Much of the information will be covered quickly, with handouts available. Key pieces of safety will be hands on with examples to hold and examine, and an opportunity for you to use the tools on a workpiece to make some of the things we discuss.
Safety issues will include:
- Basic Lathe Checks before turning it on.
- PPE for Turning and safe clothing around spinning wood or other material
- An introduction to safe tool usage for Carbide Tools and Traditional Tools with basic information on sharpening.
- Introduction to Mounting Methods for safely attaching the workpiece to the Lathe.
- Wood Selection, considering safety and where the wood is from. We will address the MakeICT Hazardous Material Policy and the
implications for woodturning. This would include working with damaged wood, such as spalting, bark inclusions and worm holes.
Additional PPE considerations and products to address various damaged wood issues.
- We will touch on safety while sanding on the lathe.
- We will touch on safety and choices of finishing products for turned items.
A Test Out Form of this Authorization Class is available. (Expect Mid November)
Class size will vary based on the number of experienced SKW Members available to assist.
Woodshop Safety Authorization is Required
Woodshop Hazardous Materials Authorization is highly recommended.
Letterpress Shop Safety Class
Time: Nov 07 02:00 PM - 03:00 PMHost: David Springs
Register: http://makeict.wildapricot.org/event-5030773
Price: MakeICT Members - $0.00
Price: Non-Members - $20.00
Ages: 12 to 131
Learn the basics of safely working in the Letterpress Shop in this safety class. We will cover basic safety in operating the Challenge Paper Shear. This is the minimum requirement for doing work in the Letterpress Shop, especially for cutting paper on the shear. We will also cover basic safety around the Heidelberg 10 x 15 Letterpress - however this class does NOT teach you how to produce work on the presses. Successful completion of this class will qualify you to work in the Letterpress Area, operate the Challenge Paper Shear, and operate the NuArc Flip-Top plate burner. And it will teach you how to work safely around the Heidelberg press. Expect to spend an hour in class, where you will have time to make a number of test cuts on the Paper Shear, and will learn to operate the NuArc. Please note that while this class does cover safety on the Heidelberg, it does not in itself qualify you to operate it.
Prerequisites: Please read the Letterpress Area tool access policy and safety requirements on the wiki page prior to coming to class. No special personal protective equipment (goggles, hearing protection, or any other) is required, but please keep long hair tied up.
Upon completion of the safety demonstration you can use the paper shear and plate burner for your projects whenever you work at MakeICT as a member!
Textile Time
Time: Nov 16 06:00 PM - 08:00 PMHost: Malissa Long
Register: http://makeict.wildapricot.org/event-5032531
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Are you a textile aficionado? Do you dabble in the textile arts? Are you looking for a tribe to encourage and inspire your fiber artistic creativity? Or do you have questions about textiles you need answered? Once a month we will get together to encourage each other to explore fiber in it's many forms and work through our UFOs(unfinished fiber objects). So come play with your yarns, thread, cloths, felts, or fibers in whichever state they exist. Hand, machine, and print work encouraged.