Event updates for June 2023
Forbidden Flora: Toxic Treasures in Herbology
Time: Jun 17 10:00 AM - 12:00 PMHost: Sherry Ibrahim
Register: http://makeict.wildapricot.org/event-5232593
Price: MakeICT Members - $5.00
Price: Non-Members - $10.00
Ages: 11 to 120
Paracelsus said (albeit in Latin) “All things are poison, and nothing is without poison; the dosage alone makes it so a thing is not a poison.” The complex chemistry of plants have served humans and other animals medicinally and as poison throughout millennia. You may be surprised to learn how beautiful some toxic plants are, and how toxic some commonly grown vegetables and ornamental plants are. Join us for a peek into the world of the Poison Garden! Live specimens will be observed. Touching is not recommended. Eating is not allowed. Attendees under the age of 16 must be accompanied by a legal guardian.
Woodturning: Maker Monday Edition
Time: Jun 26 06:30 PM - 08:30 PMHost: John Nicholas
Register: http://makeict.wildapricot.org/event-5269446
Price: MakeICT Members - $10.00
Price: Non-Members - $15.00
Ages: 12 to 100
Makers should make things on Maker Monday. Turn something simple to find out what woodturning is about.
We will have several experienced woodturners, Members of South Kansas Woodturners, available. The project for this class has not been determined at this time.
We wear Protective Face Shields (Safety) when turning. Dust or Cloth Masks are optional.
Kid Friendly, requires Parent with those under 16.
This exploring Woodturning Class does not require Woodshop Safety or Lathe Authorization.
Make a Slide Top Pencil Box
Time: Jun 01 06:00 PM - 08:30 PMHost: Doug Wilson
Register: http://makeict.wildapricot.org/event-5272473
Price: MakeICT Members - $25.00
Price: Non-Members - $30.00
Ages: 16 and up
Required Authorizations: Woodshop
Learn to use the Box Joint (AKA Finger Joint) jig to create a small pencil box.
Makers will learn new techniques for box making that includes the following:
* Use the Box Joint Jig to create STRONG joints.
* Re-saw lumber to create a grain pattern that's continuous around all corners.
* Create a sliding lid.
Makers can expect to use 2 of the following woods (based on availability at the time); maple, cherry, canary, or pecan.
Member Orientation
Time: Jun 10 02:30 PM - 05:00 PMHost: Membership committee
Register: http://makeict.wildapricot.org/event-5277411
Price: MakeICT Members - $0.00
Member Orientation sessions exist to familiarize our new members with the building and the organization. To qualify for this session, you must fit the following requirements:
- Membership profile completed and approved
- Waiver Signed
- Payments are all current
This session will including a short slideshow about MakeICT and then an in-depth tour of the facility. Members will also sit down with a number of leadership and peer members for a brief discussion to allow us to get to know you. At the end of this session, you will get your key to the building so that you can come and go as you please.
https://makeict.wildapricot.org/Sys/Login
Member Orientation
Time: Jun 20 06:00 PM - 08:30 PMHost: Membership committee
Register: http://makeict.wildapricot.org/event-5277413
Price: MakeICT Members - $0.00
Member Orientation sessions exist to familiarize our new members with the building and the organization. To qualify for this session, you must fit the following requirements:
- Membership profile completed and approved
- Waiver Signed
- Payments are all current
This session will including a short slideshow about MakeICT and then an in-depth tour of the facility. Members will also sit down with a number of leadership and peer members for a brief discussion to allow us to get to know you. At the end of this session, you will get your key to the building so that you can come and go as you please.
https://makeict.wildapricot.org/Sys/Login
Maker Monday
Time: Jun 12 07:00 PM - 08:30 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-5277416
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Maker Monday is our open house event.
It’s a great way to experience the makerspace and the maker culture in person. Come tour our shops and see our brand new facility at 5920 E. Mt. Vernon. You’ll learn all about our makerspace, tools, policies, people, and how we operate.
Our tours are free and open to the public. While you are welcome to just show up, we prefer that you register in advance so we have enough members on hand to assist with our tours. Sessions are at 7.
If you wish to begin your membership at Maker Monday we will have members here to sign you up.
You are welcome to hang out and chat after your tour. There’s always something interesting going on at Maker Monday!
To contact our onboarding team to arrange a tour outside the normal ones on Maker Mondays or general questions about joining, send an email to onboarding@makeict.org.
Membership Committee Meeting
Time: Jun 13 06:00 PM - 08:00 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-5277422
Know Your Sewing Machine (2 Evenings)
Time: Jun 13 07:00 PM - 09:00 PMHost: Malissa Long
Register: http://makeict.wildapricot.org/event-5280191
Price: MakeICT Members - $40.00
Price: Non-Members - $45.00
Ages: 8 and up
This class occurs over two evenings: Tuesday, June 13th, and Thursday, June 15th, 7-9 pm
In the first session, you will learn the parts of your sewing machine along with knowledge about bobbins, needles, decorative stitches, and a little sewing machine history.
In the second session, you will use what you learn to make a cute simple bag with seams and a pair of handles. You will need tools to remove your needle, extra bobbins, and white thread.
No previous machine knowledge is required. Use one of the classroom machines or bring your own.
Metalshop Safety Class
Time: Jun 05 07:00 PM - 08:30 PMHost: Rustin Atkeisson
Register: http://makeict.wildapricot.org/event-5296940
Price: MakeICT Members - $0.00
Price: Non-Members - $20.00
Ages: 16 and up
The Metalshop Safety Class will cover basic safety for working in both the Hot room and Cold room for the Metalshop at MakeICT, as well as some basic expectations. The following tools will be covered :
Pipe bender
Tubing roller
Metal shear
Large and small sheet metal brakes
Drill press
Hand grinders
Horizontal band saw
Vertical band saw
Chop Saw
Other equipment not listed may require further authorization. This class is required before taking most other metalworking classes or workshops.
Safety glasses are available but we recommend bringing your own if you can.
Metalshop Safety Class
Time: Jun 18 02:00 PM - 03:30 PMHost: Rustin Atkeisson
Register: http://makeict.wildapricot.org/event-5296942
Price: MakeICT Members - $0.00
Price: Non-Members - $20.00
Ages: 16 and up
The Metalshop Safety Class will cover basic safety for working in both the Hot room and Cold room for the Metalshop at MakeICT, as well as some basic expectations. The following tools will be covered :
Pipe bender
Tubing roller
Metal shear
Large and small sheet metal brakes
Drill press
Hand grinders
Horizontal band saw
Vertical band saw
Chop Saw
Other equipment not listed may require further authorization. This class is required before taking most other metalworking classes or workshops.
Safety glasses are available but we recommend bringing your own if you can.
Metal Lathe Basics
Time: Jun 17 10:00 AM - 11:30 AMHost: Rustin Atkeisson
Register: http://makeict.wildapricot.org/event-5296943
Price: MakeICT Members - $19.00
Price: Non-Members - $24.00
Ages: 16 and up
Required Authorizations: Metalshop
Metal Lathe Basics will cover the basic parts of the metal lathe while also going thru the proper use and operation of the Craftsman and Logan metal lathes.
The end project will include basic operations such as facing and parting as well as knurling and adding internal threading.
Safety glasses are required.
Manual Milling Basics
Time: Jun 17 12:00 PM - 02:30 PMHost: Rustin Atkeisson
Register: http://makeict.wildapricot.org/event-5296945
Price: MakeICT Members - $24.00
Price: Non-Members - $29.00
Ages: 16 and up
Required Authorizations: Metalshop
Manual Mill Basics will cover the basic parts of a manual mill while also going thru proper use and operation of the EMCO manual mill.
The end project will include basic operations such as facing, squaring, drilling, and counter boring.
Safety glasses are required.
Metalshop Safety must be completed before signing up for this class.
Powder Coating Basics
Time: Jun 17 04:00 PM - 06:00 PMHost: Rustin Atkeisson
Register: http://makeict.wildapricot.org/event-5296946
Price: MakeICT Members - $15.00
Price: Non-Members - $20.00
Ages: 16 and up
Required Authorizations: Metalshop
This class will cover safety of the powder coating area, powder coating gun, air compressor and the powder coating oven. You will get to powder coat an item to take home to show off to your friends! Once you complete this class you be authorized to use the powder coating equipment.
Powder coating is a type of coating that is applied as a free-flowing, dry powder. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a “skin”. It is usually used to create a hard finish that is tougher than conventional paint. Powder coating is mainly used for coating of metals.
One-Color Screen Printing
Time: Jun 11 06:00 PM - 08:00 PMHost: Doug Wilson
Register: http://makeict.wildapricot.org/event-5305035
Price: MakeICT Members - $20.00
Price: Non-Members - $25.00
Ages: 10 and up
This class will focus on the basics of screen-printing; from choosing a design, exposing a screen, washing out the stencil, and applying the ink to paper. Participants will get the opportunity to practice good screen printing technique by helping to produce a run of 50 wall-worthy prints.
We'll also answer any curiosities you might have regarding multi-color printing, printing on cloth, and obtaining and using other people's artwork.
Laser Cutting Basics
Time: Jun 10 02:00 PM - 04:00 PMHost: Christian Kindel
Register: http://makeict.wildapricot.org/event-5305280
Price: MakeICT Members - $20.00
Price: Non-Members - $25.00
This class will teach participants how to use the 80 watt CO2 laser cutters at MakeICT. We will be using the LightBurn software to create and cut a simple project.
Participants will learn the capabilities of the laser cutter, machine and material safety, and operation of the machine in Cartesian (flat) mode. All participants will complete a small project to practice running the machine.
Please bring a USB flash drive if you have one. Completion of this class grants the necessary authorization to use the laser cutter.
3D Printing Basics
Time: Jun 11 03:00 PM - 05:00 PMHost: Christian Kindel
Register: http://makeict.wildapricot.org/event-5305284
Price: MakeICT Members - $20.00
Price: Non-Members - $25.00
Ages: 12 and up
Learn the basics of 3D printing and how to use the printers at MakeICT!
We'll cover how 3D printing works, materials used in 3D printing, importing 3D files into slicer software, and important techniques for successful printing. Each participant will get a chance to practice with the software and print a small object to take home. Sample models will be provided, but participants may also bring in an STL file of a small (~3cm3) object to try out.
Completion of this class will grant authorization for using the 3D printers at MakeICT.
Print Jam: Bring a Garment and get a multi-color Print!
Time: Jun 12 07:00 PM - 09:00 PMHost: Doug Wilson
Register: http://makeict.wildapricot.org/event-5307186
Price: MakeICT Members - $5.00
Price: Non-Members - $5.00
Ages: 1 to 99
Print Jams are a great way to see a demonstration of a multicolor print on cloth. Bring a garment and have it printed with original artwork by Doug Wilson.
This print jam will feature the "There's No Place Like Home" design currently on display in the printmaking studio. It looks best on lightly colored, cotton garments. I'll be printing slate colored linework and golden brown accent for the lettering.
100% of the proceeds for the event go directly to the printmaking studio. Those who just want to watch need not register.
1 Like
Woodshop Safety Class
Time: Jun 14 06:00 PM - 08:00 PMHost: Doug Wilson
Register: http://makeict.wildapricot.org/event-5307190
Price: MakeICT Members - $0.00
Price: Non-Members - $5.00
Ages: 15 to 99
Learn the basics to safely operate the major woodshop tools in this safety class including understanding the limitations of each tool, the forces created when using the tool and how to maintain safe control for improved performance. Tools covered: SawStop table saw, drill press, band saw, router table, jointer, planer, miter saw, oscillating spindle and belt / disk sanders and scroll saw. Expect around an hour of walkthrough with our tools and equipment, followed by an OPTIONAL hour of hands on practice with the tools aimed at those who have little or no practice with woodworking tools
Prerequisites: Please read the woodshop tool access policy and safety requirements on the wiki page prior to coming to class. Safety Personal Protective Equipment (PPE): • Mandatory: Closed-toed shoes, eye protection, short sleeves • Advisable: Hearing protection
Upon completion of the safety demonstration you can use this woodshop equipment for your projects whenever you work at MakeICT as a member!
Woodturning: Maker Monday Edition
Time: Jun 12 06:30 PM - 08:30 PMHost: John Nicholas
Register: http://makeict.wildapricot.org/event-5307714
Price: MakeICT Members - $10.00
Price: Non-Members - $15.00
Ages: 12 to 100
Makers should make things on Maker Monday. Turn something simple to find out what woodturning is about.
We will have several experienced woodturners, Members of South Kansas Woodturners, available. This week we will turn a penl.
We wear Protective Face Shields (Safety) when turning. Dust or Cloth Masks are optional.
Kid Friendly, requires Parent with those under 16.
This exploring Woodturning Class does not require Woodshop Safety or Lathe Authorization.