Event updates for July 2023
Learn to Solder and Make An LED Sculpture
Time: Jul 29 01:30 PM - 05:30 PMHost: Kez Cook
Register: http://makeict.wildapricot.org/event-5298326
Price: MakeICT Members - $25.00
Price: Non-Members - $30.00
Ages: 12 and up
Come hang out and create an artistic LED sculpture! I’m Kez and I will be your adventure guide for this course!
We will navigate incredibly Basic Electronics, learn the Zen of Soldering, express ourselves with CAT5 cable, and throw all precision to the wind when we get out the Hot Glue Guns.
Boring Technical Stuff:
Learn to solder by soldering wires and resisters together to form an LED project, attaching a power cord, and using hot glue as insulation and bottom weight.
No programming or prior electronics experience needed. This will be USB port powered. This class will involve using a hot soldering iron and hot glue gun.
Kids 12 and older are welcome, but they MUST be accompanied by a responsible adult, who will supervise them.
1 Like
Maker Monday
Time: Jul 10 07:00 PM - 08:30 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-5311645
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Maker Monday is our open house event.
It’s a great way to experience the makerspace and the maker culture in person. Come tour our shops and see our brand new facility at 5920 E. Mt. Vernon. You’ll learn all about our makerspace, tools, policies, people, and how we operate.
Our tours are free and open to the public. While you are welcome to just show up, we prefer that you register in advance so we have enough members on hand to assist with our tours. Sessions are at 7.
If you wish to begin your membership at Maker Monday we will have members here to sign you up.
You are welcome to hang out and chat after your tour. There’s always something interesting going on at Maker Monday!
To contact our onboarding team to arrange a tour outside the normal ones on Maker Mondays or general questions about joining, send an email to onboarding@makeict.org.
Maker Monday
Time: Jul 24 07:00 PM - 08:30 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-5311646
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Maker Monday is our open house event.
It’s a great way to experience the makerspace and the maker culture in person. Come tour our shops and see our brand new facility at 5920 E. Mt. Vernon. You’ll learn all about our makerspace, tools, policies, people, and how we operate.
Our tours are free and open to the public. While you are welcome to just show up, we prefer that you register in advance so we have enough members on hand to assist with our tours. Sessions are at 7.
If you wish to begin your membership at Maker Monday we will have members here to sign you up.
You are welcome to hang out and chat after your tour. There’s always something interesting going on at Maker Monday!
To contact our onboarding team to arrange a tour outside the normal ones on Maker Mondays or general questions about joining, send an email to onboarding@makeict.org.
Member Orientation
Time: Jul 08 02:30 PM - 05:00 PMHost: Membership committee
Register: http://makeict.wildapricot.org/event-5311647
Price: MakeICT Members - $0.00
Member Orientation sessions exist to familiarize our new members with the building and the organization. To qualify for this session, you must fit the following requirements:
- Membership profile completed and approved
- Waiver Signed
- Payments are all current
This session will including a short slideshow about MakeICT and then an in-depth tour of the facility. Members will also sit down with a number of leadership and peer members for a brief discussion to allow us to get to know you. At the end of this session, you will get your key to the building so that you can come and go as you please.
https://makeict.wildapricot.org/Sys/Login
Member Orientation
Time: Jul 18 06:00 PM - 08:30 PMHost: Membership committee
Register: http://makeict.wildapricot.org/event-5311648
Price: MakeICT Members - $0.00
Member Orientation sessions exist to familiarize our new members with the building and the organization. To qualify for this session, you must fit the following requirements:
- Membership profile completed and approved
- Waiver Signed
- Payments are all current
This session will including a short slideshow about MakeICT and then an in-depth tour of the facility. Members will also sit down with a number of leadership and peer members for a brief discussion to allow us to get to know you. At the end of this session, you will get your key to the building so that you can come and go as you please.
https://makeict.wildapricot.org/Sys/Login
Membership Committee Meeting
Time: Jul 11 06:00 PM - 08:00 PMHost: Membership Committee
Advanced Laser: Using The Rotary Axis
Time: Jul 01 02:00 PM - 04:00 PMHost: Christian Kindel
Register: http://makeict.wildapricot.org/event-5314996
Price: MakeICT Members - $8.00
Price: Non-Members - $15.00
Ages: 16 and up
Required Authorizations: LaserCutter
Learn to use the rotary attachment for the Laser Cutter to engrave things that are (at least roughly) cylindrical! We'll cover how to connect and set up the rotary axis and how to generate files. Each participant will get to engrave a glass or other object and take it home. Cylindrical objects will be provided, but participants may also bring their own (laser safe) objects to try out as well.
Arduino Basics
Time: Jul 02 02:00 PM - 05:00 PMHost: Christian Kindel
Register: http://makeict.wildapricot.org/event-5315010
Price: MakeICT Members - $30.00
Price: Non-Members - $35.00
Ages: 12 and up
Learn the basics of the Arduino platform! We'll go over the various hardware you can use, how to build basic circuits with an Arduino, and how to write the code to make it all work.
We have plenty of laptop computers to use. If you'd rather learn on your own, please download the Arduino IDE software from the following URL:
https://www.arduino.cc/en/main/software
All necessary hardware will be provided for use during the class.
Jewelry Lab Authorization
Time: Jul 17 07:00 PM - 08:00 PMHost: Mike Atherton
Register: http://makeict.wildapricot.org/event-5329149
Price: MakeICT Members - $0.00
Price: Non-Members - $5.00
Get acquainted with the tools used in the Jewelry Lab.
CNC Plasma Cutting Basics W/ Fusion 360
Time: Jul 05 05:30 PM - 07:00 PMHost: Chris Wirgler
Register: http://makeict.wildapricot.org/event-5329632
Price: MakeICT Members - $20.00
Price: Non-Members - $25.00
Ages: 16 to 120
Required Authorizations: Metalshop
Learn how to use the cnc plasma with fusion 360. We will walk through the basics of programming a file in fusion 360 and cutting it out on the plasma cutter. Please view the wiki page as it has the material we will be using in class. Will move quickly through it so its nice to know it beforehand!
Woodshop Safety Class
Time: Jul 05 06:00 PM - 08:00 PMHost: Doug Wilson
Register: http://makeict.wildapricot.org/event-5332713
Price: MakeICT Members - $0.00
Price: Non-Members - $20.00
Ages: 14 to 150
Learn the basics to safely operate the major woodshop tools in this safety class including understanding the limitations of each tool, the forces created when using the tool and how to maintain safe control for improved performance. Tools covered: SawStop table saw, drill press, band saw, router table, jointer, planer, miter saw, oscillating spindle and belt / disk sanders and scroll saw. Expect around an hour of walkthrough with our tools and equipment, followed by an OPTIONAL hour of hands on practice with the tools aimed at those who have little or no practice with woodworking tools
Prerequisites: Please read the woodshop tool access policy and safety requirements on the wiki page prior to coming to class. Safety Personal Protective Equipment (PPE): • Mandatory: Closed-toed shoes, eye protection, short sleeves • Advisable: Hearing protection
Upon completion of the safety demonstration you can use this woodshop equipment for your projects whenever you work at MakeICT as a member!
One-Color Screen Printing
Time: Jul 19 06:00 PM - 08:00 PMHost: Doug Wilson
Register: http://makeict.wildapricot.org/event-5332715
Price: MakeICT Members - $20.00
Price: Non-Members - $25.00
Ages: 10 and up
This class will focus on the basics of screen-printing; from choosing a design, exposing a screen, washing out the stencil, and applying the ink to paper. Participants will get the opportunity to practice good screen printing technique by helping to produce a run of 50 wall-worthy prints.
We'll also answer any curiosities you might have regarding multi-color printing, printing on cloth, and obtaining and using other people's artwork.
Woodturning: Maker Monday Edition
Time: Jul 10 06:30 PM - 08:30 PMHost: John Nicholas
Register: http://makeict.wildapricot.org/event-5333465
Price: MakeICT Members - $10.00
Price: Non-Members - $15.00
Ages: 12 to 100
Makers should make things on Maker Monday. Turn something simple to find out what woodturning is about!
We will have several experienced woodturners, Members of South Kansas Woodturners, available. Project to be determined.
We wear Protective Face Shields (Safety) when turning. Dust or Cloth Masks are optional.
Kid Friendly, requires Parent with those under 16.
This exploring Woodturning Class does not require Woodshop Safety or Lathe Authorization.
Woodturning: Maker Monday Edition
Time: Jul 24 06:30 PM - 08:30 PMHost: John Nicholas
Register: http://makeict.wildapricot.org/event-5333468
Price: MakeICT Members - $10.00
Price: Non-Members - $15.00
Ages: 12 to 100
Makers should make things on Maker Monday. Turn something simple to find out what woodturning is about!
We will have several experienced woodturners, Members of South Kansas Woodturners, available. Project to be determined.
We wear Protective Face Shields (Safety) when turning. Dust or Cloth Masks are optional.
Kid Friendly, requires Parent with those under 16.
This exploring Woodturning Class does not require Woodshop Safety or Lathe Authorization.
Metalshop Safety Class
Time: Jul 11 07:00 PM - 08:30 PMHost: Rustin Atkeisson
Register: http://makeict.wildapricot.org/event-5339310
Price: MakeICT Members - $0.00
Price: Non-Members - $20.00
Ages: 16 and up
The Metalshop Safety Class will cover basic safety for working in both the Hot room and Cold room for the Metalshop at MakeICT, as well as some basic expectations. The following tools will be covered :
Pipe bender
Tubing roller
Metal shear
Large and small sheet metal brakes
Drill press
Hand grinders
Horizontal band saw
Vertical band saw
Chop Saw
Other equipment not listed may require further authorization. This class is required before taking most other metalworking classes or workshops.
Safety glasses are available but we recommend bringing your own if you can.
Metalshop Safety Class
Time: Jul 15 12:00 PM - 01:30 PMHost: Rustin Atkeisson
Register: http://makeict.wildapricot.org/event-5339311
Price: MakeICT Members - $0.00
Price: Non-Members - $20.00
Ages: 16 and up
The Metalshop Safety Class will cover basic safety for working in both the Hot room and Cold room for the Metalshop at MakeICT, as well as some basic expectations. The following tools will be covered :
Pipe bender
Tubing roller
Metal shear
Large and small sheet metal brakes
Drill press
Hand grinders
Horizontal band saw
Vertical band saw
Chop Saw
Other equipment not listed may require further authorization. This class is required before taking most other metalworking classes or workshops.
Safety glasses are available but we recommend bringing your own if you can.
Powder Coating Basics
Time: Jul 16 10:00 AM - 12:00 PMHost: Rustin Atkeisson
Register: http://makeict.wildapricot.org/event-5339312
Price: MakeICT Members - $15.00
Price: Non-Members - $20.00
Ages: 16 and up
Required Authorizations: Metalshop
This class will cover safety of the powder coating area, powder coating gun, air compressor and the powder coating oven. You will get to powder coat an item to take home to show off to your friends! Once you complete this class you be authorized to use the powder coating equipment.
Powder coating is a type of coating that is applied as a free-flowing, dry powder. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a “skin”. It is usually used to create a hard finish that is tougher than conventional paint. Powder coating is mainly used for coating of metals.
Manual Milling Basics
Time: Jul 16 12:00 PM - 02:30 PMHost: Rustin Atkeisson
Register: http://makeict.wildapricot.org/event-5339313
Price: MakeICT Members - $24.00
Price: Non-Members - $29.00
Ages: 16 and up
Required Authorizations: Metalshop
Manual Mill Basics will cover the basic parts of a manual mill while also going thru proper use and operation of the EMCO manual mill.
The end project will include basic operations such as facing, squaring, drilling, and counter boring.
Safety glasses are required.
Metalshop Safety must be completed before signing up for this class.
Metal Lathe Basics
Time: Jul 19 07:00 PM - 08:30 PMHost: Rustin Atkeisson
Register: http://makeict.wildapricot.org/event-5339950
Price: MakeICT Members - $19.00
Price: Non-Members - $24.00
Ages: 16 and up
Required Authorizations: Metalshop
Metal Lathe Basics will cover the basic parts of the metal lathe while also going thru the proper use and operation of the Craftsman and Logan metal lathes.
The end project will include basic operations such as facing and parting as well as knurling and adding internal threading.
Safety glasses are required.