Event updates for August 2024
Stained Glass Open Lab
Time: Aug 07 06:00 PM - 09:00 PMHost: Timothy York
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 16 and up
Open Lab time for authorized Glaziers. Instructor will be available if individual help is required.
Also, if you are an experienced Glazier and want access to the tools and glass without taking the Introduction to Stained Glass course, authorizations may be performed during open lab times. Instructor will cover safety requirements, tool usage, and a skills assessment for a particular skill level. Successful completion of an authorization will add the Glazier to the authorized user list.
Use of tools and/or materials without proper authorization is prohibited.
1 Like
Introduction to Stained Glass Session 2 of 3
Time: Aug 23 06:00 PM - 09:00 PMHost: Timothy York
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 16 and up
Session 2 of 3
Introduction to designing and building stained glass art projects. Students will learn fundamental safety for handling glass and the basics of designing, cutting, foiling, soldering, framing, and hanging Tiffany style glass art. Flat work, 3-D build, special techniques and finishing will be explored. See Session 1 for full description.
Restrictions:
Due to the nature of the medium and processes being used, no one under the age of sixteen years of age will be allowed in the glass work area without PRIOR approval of the instructor.
Prerequisite: Attendance and participation in Session 1 of this class.
Instructor availability:
Typically 30 minutes prior to class session, as well as additional lab hours as published. Additional individual time by specific arrangement only.
Session 2 – 1 instructional hour + 2 hours Lab
I. Beginning project finishing including chemical conversion/aging (patina)
II. Hanging and/or mounting
III. Jigging and fixturing for production
IV. Additional requirements for individual projects
Please be punctual as a courtesy to others. Enjoy!
1 Like
Introduction to Stained Glass Session 3 of 3
Time: Aug 30 06:00 PM - 09:00 PMHost: Timothy York
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 16 and up
Session 3 of 3
Introduction to designing and building stained glass art projects. Students will learn fundamental safety for handling glass and the basics of designing, cutting, foiling, soldering, framing, and hanging Tiffany style glass art. Flat work, 3-D build, special techniques and finishing will be explored. See Session 1 for full description.
Restrictions:
Due to the nature of the medium and processes being used, no one under the age of sixteen years of age will be allowed in the glass work area without PRIOR approval of the instructor.
Prerequisite: Attendance and participation in Session 1 & 2 of this class.
Instructor availability:
Typically 30 minutes prior to class session, as well as additional lab hours as published. Additional individual time by specific arrangement only.
Session 3 – Instructional time as required + Lab and project presentation
I. Show and Tell for individual projects
II. Lessons learned round table discussion
III. Overview of other techniques and class offerings
Please be punctual as a courtesy to others. Enjoy!
1 Like
Introduction to Stained Glass Session 1 of 3
Time: Aug 16 06:00 PM - 09:00 PMHost: Timothy York
Register: http://makeict.wildapricot.org/event-5794436
Price: MakeICT Members - $60.00
Price: Non-Members - $65.00
Ages: 16 and up
Introduction to designing and building stained glass art projects. Students will learn fundamental safety for handling glass and the basics of designing, cutting, foiling, soldering, framing, and hanging Tiffany style glass art. Flat work, 3-D build, special techniques and finishing will be explored.
Tools available in the glass work area will include basic glass shaping hand tools, grinders, and soldering irons.
Lessons will be a combination of lecture and hands-on training. Lab time will be scheduled within the sessions as optional work periods, but are highly recommended for individual and small group learning of specific topics. A beginning project (including materials) will be given to all students during the initial session, with an additional individual project of the student’s choice, to be completed by the end of the three session class. Materials for the individual project are the responsibility of the class participants. Special pricing or considerations from local sources for materials and tools may be available; check with the instructor for details.
Restrictions:
Due to the nature of the medium and processes being used, no one under the age of sixteen years of age will be allowed in the glass work area without PRIOR approval of the instructor.
Instructor availability:
Typically 30 minutes prior to class session, as well as additional lab hours as published. Additional individual time by specific arrangement only.
Session 1 – 2 instructional hours + 1 hour Lab
I. Class overview
II. brief history of stained glass and its manufacture
III. Safety in the work area and tools
IV. Design overview and special techniques with limited exposure to bevels and jewels
V. Cutting, forming, foiling, and soldering for Beginning project
Please be punctual as a courtesy to others. Enjoy!
2 Likes
Stained Glass Open Lab
Time: Aug 19 06:00 PM - 09:00 PMHost: Timothy York
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 16 and up
Open Lab time for authorized Glaziers. Instructor will be available if individual help is required.
Also, if you are an experienced Glazier and want access to the tools and glass without taking the Introduction to Stained Glass course, authorizations may be performed during open lab times. Instructor will cover safety requirements, tool usage, and a skills assessment for a particular skill level. Successful completion of an authorization will add the Glazier to the authorized user list.
Use of tools and/or materials without proper authorization is prohibited.
1 Like
Laser Cutting Basics
Time: Aug 11 07:00 PM - 09:00 PMHost: Kim Burton
Register: http://makeict.wildapricot.org/event-5801908
Price: MakeICT Members - $20.00
Price: Non-Members - $25.00
Ages: 12 and up
Learn to use the 80 watt CO2 laser cutters at MakeICT. We will discuss the capabilities of the machines, safety rules, and operation in flat mode. Participants will complete a small project using Inkscape and LightBurn software.
Intermediate computer proficiency is recommended. Users should be comfortable with web browsing, Windows file folder navigation, copy and paste shortcut keys, and mouse operation.
1 Like
Maker Monday
Time: Aug 05 07:00 PM - 08:30 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-5808379
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Maker Monday is our open house event. It’s a great way to experience the makerspace and the maker culture in person. You’ll learn all about our space, tools, policies, people, and how we operate.
Our tours are free and open to the public. While you are welcome to just show up, we prefer that you register in advance so we have enough members on hand to assist with our tours.
You are welcome to hang out and chat after your tour. There’s always something interesting going on at Maker Monday!
To contact our Membership Committee to arrange a tour outside of Maker Mondays, or if you have general questions about joining, send an email to membership@makeict.org.
1 Like
One-Color Screen Printing
Time: Aug 19 06:00 PM - 08:00 PMHost: Doug Wilson
Register: http://makeict.wildapricot.org/event-5809625
Price: MakeICT Members - $20.00
Price: Non-Members - $25.00
Ages: 10 and up
This class will focus on the basics of screen-printing; from choosing a design, exposing a screen, washing out the stencil, and applying the ink to paper. Participants will get the opportunity to practice good screen printing technique by helping to produce a run of 50 wall-worthy prints.
We'll also answer any curiosities you might have regarding multi-color printing, printing on cloth, and obtaining and using other people's artwork.
1 Like
Stained Glass Open Lab
Time: Aug 02 06:00 PM - 09:00 PMHost: Timothy York
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 16 and up
Open Lab time for authorized Glaziers. Instructor will be available if individual help is required.
Also, if you are an experienced Glazier and want access to the tools and glass without taking the Introduction to Stained Glass course, authorizations may be performed during open lab times. Instructor will cover safety requirements, tool usage, and a skills assessment for a particular skill level. Successful completion of an authorization will add the Glazier to the authorized user list.
Use of tools and/or materials without proper authorization is prohibited.
New Member Orientation Tuesday
Time: Aug 06 07:00 PM - 09:30 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-5818488
Price: MakeICT Members - $0.00
New Member Orientation sessions are required for all new members and exist to familiarize you with the building and the organization. To qualify for this session, you must fit the following requirements:
- Membership profile completed and approved
- Waiver Signed
- Payments are all current
This session will including a short slideshow about MakeICT and then an in-depth tour of the facility. Members will also sit down with a number of leadership and peer members for a brief discussion to allow us to get to know you. At the end of this session, you will get your key to the building so that you can come and go as you please.
https://makeict.wildapricot.org/Sys/Login
1 Like
New Member Orientation
Time: Aug 10 02:00 PM - 04:30 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-5818495
Price: MakeICT Members - $0.00
New Member Orientation sessions are required for all new members and exist to familiarize you with the building and the organization. To qualify for this session, you must fit the following requirements:
- Membership profile completed and approved
- Waiver Signed
- Payments are all current
This session will including a short slideshow about MakeICT and then an in-depth tour of the facility. Members will also sit down with a number of leadership and peer members for a brief discussion to allow us to get to know you. At the end of this session, you will get your key to the building so that you can come and go as you please.
https://makeict.wildapricot.org/Sys/Login
1 Like
New Member Orientation
Time: Aug 24 02:00 PM - 04:30 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-5818499
Price: MakeICT Members - $0.00
New Member Orientation sessions are required for all new members and exist to familiarize you with the building and the organization. To qualify for this session, you must fit the following requirements:
- Membership profile completed and approved
- Waiver Signed
- Payments are all current
This session will including a short slideshow about MakeICT and then an in-depth tour of the facility. Members will also sit down with a number of leadership and peer members for a brief discussion to allow us to get to know you. At the end of this session, you will get your key to the building so that you can come and go as you please.
https://makeict.wildapricot.org/Sys/Login
1 Like
Open (Unstructured) Electronics
Time: Aug 18 03:00 PM - 05:00 PMHost: Kim Kirwan
Register: http://makeict.wildapricot.org/event-5822974
Price: MakeICT Members - $0.00
Price: Non-Members - $5.00
Open unstructured electronics class. What do you need to make? What do you need to know to make it? Questions? Why are there so many types of motors? What are they for? Questions about electricity: Why do electricians do what they do? Why do we need both a white and green wire if they go to the same place? Do you have a broken thing you want to try to fix? Bring all your questions!
3 Likes
Wax Seal Workshop
Time: Aug 14 06:00 PM - 08:00 PMHost: Jae Lear
Register: http://makeict.wildapricot.org/event-5822976
Price: MakeICT Members - $0.00
Price: Non-Members - $5.00
Ages: 6 and up
Looking for something fun to do this Summer? Jae Lear is instructing a brand new WAX SEAL workshop at MakeICT!
Regardless of your age or skill level, this hands-on class will give you all the materials you need to make unique wax seal creations. Lear Heath Studio will provide all the supplies for creating a variety of wax seal products. Using over 100 stamp designs and a spectrum of wax bead colors, attendees will be able to make earrings, magnets, keychains, fidgets, and more!
Join us from 6-8pm on Wednesday, August 14th, 2024, for our all-ages Wax Seal Workshop at MakeICT (5920 E Mt Vernon, Wichita, KS 67218).
Minors must have an adult present. For questions or inquiries, please contact Jae Lear at LearHeathStudio@gmail.com
3 Likes
Maker Monday
Time: Aug 26 07:00 PM - 08:30 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-5818490
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Maker Monday is our open house event. It’s a great way to experience the makerspace and the maker culture in person. You’ll learn all about our space, tools, policies, people, and how we operate.
Our tours are free and open to the public. While you are welcome to just show up, we prefer that you register in advance so we have enough members on hand to assist with our tours.
You are welcome to hang out and chat after your tour. There’s always something interesting going on at Maker Monday!
To contact our Membership Committee to arrange a tour outside of Maker Mondays, or if you have general questions about joining, send an email to membership@makeict.org.
Maker Monday
Time: Aug 12 07:00 PM - 08:30 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-5824017
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Maker Monday is our open house event. It’s a great way to experience the makerspace and the maker culture in person. You’ll learn all about our space, tools, policies, people, and how we operate.
Our tours are free and open to the public. While you are welcome to just show up, we prefer that you register in advance so we have enough members on hand to assist with our tours.
You are welcome to hang out and chat after your tour. There’s always something interesting going on at Maker Monday!
To contact our Membership Committee to arrange a tour outside of Maker Mondays, or if you have general questions about joining, send an email to membership@makeict.org.
Woodshop Authorization
Time: Aug 10 03:00 PM - 06:00 PMHost: Aaron Rivers
Register: http://makeict.wildapricot.org/event-5827008
Price: MakeICT Members - $0.00
Price: Non-Members - $20.00
Learn the basics to safely operate the major woodshop tools in this safety class including understanding the limitations of each tool, the forces created when using the tool and how to maintain safe control for improved performance. Tools covered: SawStop table saw, drill press, band saw, router table, jointer, planer, miter saw, oscillating spindle and belt / disk sanders and scroll saw. Expect at least two hours of walk-through with our tools and equipment, followed by an OPTIONAL hour of hands on practice with the tools aimed at those who have little or no practice with woodworking tools
Prerequisites: Please read the woodshop tool access policy and safety requirements on the wiki page prior to coming to class. Safety Personal Protective Equipment (PPE): • Mandatory: Closed-toed shoes, eye protection, short sleeves • Advisable: Hearing protection
Upon completion of the safety demonstration you can use this woodshop equipment for your projects whenever you work at MakeICT as a member!
Instructor may be slightly late. Please call if you get worried, number is posted in woodshop. Thanks!
1 Like
Woodshop Hazardous Materials Authorization
Time: Aug 10 06:30 PM - 08:30 PMHost: Aaron Rivers
Register: http://makeict.wildapricot.org/event-5827009
Price: MakeICT Members - $0.00
Price: Non-Members - $5.00
Ages: 16 and up
Learn to use exotic materials safely in our shared space. Participants will learn how to clean re-claimed wood, test for lead paint, and adequately clean up after the use of exotic woods. Once authorized, participants will be allowed to use exotic woods in the woodshop at any time. Expect to get dirty. Participants are encouraged to bring respirators if they have one, though dust masks will be provided.
*This CAN be taken before being authorized for the woodshop, though the use of the tools in the space would still require Woodshop Authorization.
The instructor of this class may be slightly late. If so please be patient, if more than 5 minutes have passed or your just very anxious then use his phone number (posted in the woodshop) to call and confirm he is in route.
1 Like
Woodshop Authorization
Time: Aug 22 06:00 PM - 09:00 PMHost: Aaron Rivers
Register: http://makeict.wildapricot.org/event-5827011
Price: MakeICT Members - $0.00
Price: Non-Members - $20.00
Learn the basics to safely operate the major woodshop tools in this safety class including understanding the limitations of each tool, the forces created when using the tool and how to maintain safe control for improved performance. Tools covered: SawStop table saw, drill press, band saw, router table, jointer, planer, miter saw, oscillating spindle and belt / disk sanders and scroll saw. Expect at least two hours of walk-through with our tools and equipment, followed by an OPTIONAL hour of hands on practice with the tools aimed at those who have little or no practice with woodworking tools
Prerequisites: Please read the woodshop tool access policy and safety requirements on the wiki page prior to coming to class. Safety Personal Protective Equipment (PPE): • Mandatory: Closed-toed shoes, eye protection, short sleeves • Advisable: Hearing protection
Upon completion of the safety demonstration you can use this woodshop equipment for your projects whenever you work at MakeICT as a member!
Instructor may be slightly late. Please call if you get worried, number is posted in woodshop. Thanks!
1 Like