Wide Door for FabLab and ADA Parking Space

1

We were able to get a few more items checked off the list for today.

First, we got the ADA handicap parking space painted:

IMG_20200312_172247
IMG_20200312_1722472024×1518 1.23 MB

IMG_20200312_172238
IMG_20200312_1722382024×1518 1.27 MB

Second, we have widened the doorway of the FabLab so that we can move the lasers in without tipping them on their side or end:

IMG_20200312_172538
IMG_20200312_1725382024×1518 957 KB

IMG_20200312_172526
IMG_20200312_1725264048×3036 3.76 MB

The plan is to replace the original 36 inch door once the lasers are in place. The section of wall that we took out will be replaced with a stud wall. That way, if we ever decide to purchase another laser, or if we have reason to need a wide doorway to move something in or out, we will be able to easily remove the door and stud wall.

Thanks to everyone who helped out today!

2

The fablab might need another coat of wax…

20200312_175753
20200312_1757532016×1512 1.04 MB

20200312_171106
20200312_1711064032×3024 1.45 MB

3

No, not wax! How about an air cleaner!

4

Oh no… I need five good privates and a gallon of bowling alley wax…

5

@james.a.seymour Good to have privates. I thing the big thing on the wax floor will be a good, careful cleaning. The issue is the small dust, grit and particles. Effectively cleaning those up, goes a long way.

John