Will 0.040" electrodes fit in our tig welder torch? I have only used 3/32" and can’t tell if the torch will tighten down on a smaller tungsten. Thanks.
I vaguely remember having to change out the collet when going from 1/8in to 3/32in on my own Syncrowave210… Not sure on going down to .040, but the collets weren’t that expensive at Matheson.
Thanks; the question I should have asked is, do we have any other collets for the tig torch? The one in it is 3/32", and I’m looking for 1/16" or 0.04".