Time: Sep 08 05:30 PM - 07:30 PM Host: Joe Pajor KB0KFH Register:http://makeict.wildapricot.org/event-6333405 Price: MakeICT Members - $0.00 Price: Non-Members - $0.00 Ages: 16 to 100
Two-way Radio Operating Sessions are an opportunity for licensed amateur radio operators to operate KS0ICT the club station of the MakeICT Amateur Radio Club of the Two-way Radio Committee of MakeICT. Those who are not yet licensed can attend and get on the air with a licensed operator as the control operator to guide you.
These sessions usually include Maker Mondays to support the facility tour of those events.
Time: Sep 22 06:00 PM - 08:00 PM Host: Joe Pajor KB0KFH Register:http://makeict.wildapricot.org/event-6333407 Price: MakeICT Members - $0.00 Price: Non-Members - $0.00 Ages: 16 to 100
Two-way Radio Operating Sessions are an opportunity for licensed amateur radio operators to operate KS0ICT the club station of the MakeICT Amateur Radio Club of the Two-way Radio Committee of MakeICT. Those who are not yet licensed can attend and get on the air with a licensed operator as the control operator to guide you.
These sessions usually include Maker Mondays to support the facility tour of those events.
Time: Sep 21 06:00 PM - 08:00 PM Host: Kim Burton Register:http://makeict.wildapricot.org/event-6338992 Price: MakeICT Members - $10.00 Price: Non-Members - $15.00 Ages: 12 and up
Learn the basics of vinyl cutting and how to use the vinyl cutter at MakeICT! We'll cover how vinyl cutters work, how to convert vector files for cutting, and how to prepare and apply vinyl decals. Each participant will practice with the software and cut at least one single color vinyl graphic to take home. Vinyl and example files will be provided, but participants may also bring in a vector graphic of their own (subject to review) to try out.
New Member Orientation sessions are required for all new members and exist to familiarize you with the building and the organization. To qualify for this session, you must fit the following requirements:
- Membership profile completed and approved
- Waiver Signed
- Payments are all current
This session will including a short slideshow about MakeICT and then an in-depth tour of the facility. Members will also sit down with a number of leadership and peer members for a brief discussion to allow us to get to know you. At the end of this session, you will get your key to the building so that you can come and go as you please.
New Member Orientation sessions are required for all new members and exist to familiarize you with the building and the organization. To qualify for this session, you must fit the following requirements:
- Membership profile completed and approved
- Waiver Signed
- Payments are all current
This session will including a short slideshow about MakeICT and then an in-depth tour of the facility. Members will also sit down with a number of leadership and peer members for a brief discussion to allow us to get to know you. At the end of this session, you will get your key to the building so that you can come and go as you please.
Time: Sep 17 06:00 PM - 07:00 PM Host: Larry Meeks Register:http://makeict.wildapricot.org/event-6347446 Price: MakeICT Members - $0.00 Price: Non-Members - $20.00 Ages: 16 and up
The Metalshop Safety Class will cover basic safety for working in both the Hot room and Cold room for the Metalshop at MakeICT, as well as some basic expectations. The following tools will be covered :
Pipe bender
Tubing roller
Metal shear
Large and small sheet metal brakes
Drill press
Hand grinders
Horizontal band saw
Vertical band saw
Chop Saw
Other equipment not listed may require further authorization. This class is required before taking most other metalworking classes or workshops.
Safety glasses are available but we recommend bringing your own if you can.
We'll cover how 3D printing works, materials used in 3D printing, importing 3D files into slicer software, and important techniques for successful printing. Each participant will get a chance to practice with the software and print a small object to take home. Sample models will be provided, but participants may also bring in an STL file of a small (~3cm3) object to try out.
Completion of this class will grant authorization for using the 3D Resin printers at MakeICT.
Please bring your own laptop if you have one so you can follow along.