Event updates for November 2024
Maker Monday
Time: Nov 11 07:00 PM - 09:00 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-5879149
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Maker Monday is our open house event. It’s a great way to experience the makerspace and the maker culture in person. You’ll learn all about our space, tools, policies, people, and how we operate.
Our tours are free and open to the public. While you are welcome to just show up, we prefer that you register in advance so we have enough members on hand to assist with our tours.
You are welcome to hang out and chat after your tour. There’s always something interesting going on at Maker Monday!
To contact our Membership Committee to arrange a tour outside of Maker Mondays, or if you have general questions about joining, send an email to membership@makeict.org.
1 Like
Maker Monday
Time: Nov 25 07:00 PM - 09:00 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-5879152
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Maker Monday is our open house event. It’s a great way to experience the makerspace and the maker culture in person. You’ll learn all about our space, tools, policies, people, and how we operate.
Our tours are free and open to the public. While you are welcome to just show up, we prefer that you register in advance so we have enough members on hand to assist with our tours.
You are welcome to hang out and chat after your tour. There’s always something interesting going on at Maker Monday!
To contact our Membership Committee to arrange a tour outside of Maker Mondays, or if you have general questions about joining, send an email to membership@makeict.org.
1 Like
New Member Orientation
Time: Nov 19 07:00 PM - 09:30 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-5879174
Price: MakeICT Members - $0.00
New Member Orientation sessions are required for all new members and exist to familiarize you with the building and the organization. To qualify for this session, you must fit the following requirements:
- Membership profile completed and approved
- Waiver Signed
- Payments are all current
This session will including a short slideshow about MakeICT and then an in-depth tour of the facility. Members will also sit down with a number of leadership and peer members for a brief discussion to allow us to get to know you. At the end of this session, you will get your key to the building so that you can come and go as you please.
https://makeict.wildapricot.org/Sys/Login
1 Like
New Member Orientation
Time: Nov 02 02:00 PM - 04:30 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-5879173
Price: MakeICT Members - $0.00
New Member Orientation sessions are required for all new members and exist to familiarize you with the building and the organization. To qualify for this session, you must fit the following requirements:
- Membership profile completed and approved
- Waiver Signed
- Payments are all current
This session will including a short slideshow about MakeICT and then an in-depth tour of the facility. Members will also sit down with a number of leadership and peer members for a brief discussion to allow us to get to know you. At the end of this session, you will get your key to the building so that you can come and go as you please.
https://makeict.wildapricot.org/Sys/Login
New Member Orientation
Time: Nov 30 02:00 PM - 04:30 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-5879175
Price: MakeICT Members - $0.00
New Member Orientation sessions are required for all new members and exist to familiarize you with the building and the organization. To qualify for this session, you must fit the following requirements:
- Membership profile completed and approved
- Waiver Signed
- Payments are all current
This session will including a short slideshow about MakeICT and then an in-depth tour of the facility. Members will also sit down with a number of leadership and peer members for a brief discussion to allow us to get to know you. At the end of this session, you will get your key to the building so that you can come and go as you please.
https://makeict.wildapricot.org/Sys/Login
Electronics Meetup
Time: Nov 03 03:00 PM - 05:00 PMHost: Kim Kirwan
Register: http://makeict.wildapricot.org/event-5903876
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 10 and up
Electronics Meetup - Sundays 3pm-5pm. Come and meet other people also interested in electronics. Bring your projects! Bring your questions!
1 Like
Electronics Meetup
Time: Nov 10 03:00 PM - 05:00 PMHost: Kim Kirwan
Register: http://makeict.wildapricot.org/event-5903877
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 10 and up
Electronics Meetup - Sundays 3pm-5pm. Come and meet other people also interested in electronics. Bring your projects! Bring your questions!
1 Like
Electronics Meetup
Time: Nov 17 03:00 PM - 05:00 PMHost: Kim Kirwan
Register: http://makeict.wildapricot.org/event-5903878
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 10 and up
Electronics Meetup - Sundays 3pm-5pm. Come and meet other people also interested in electronics. Bring your projects! Bring your questions!
1 Like
Electronics Meetup
Time: Nov 24 03:00 PM - 05:00 PMHost: Kim Kirwan
Register: http://makeict.wildapricot.org/event-5903879
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 10 and up
Electronics Meetup - Sundays 3pm-5pm. Come and meet other people also interested in electronics. Bring your projects! Bring your questions!
1 Like
Stained Glass Class Lab
Time: Nov 11 06:00 PM - 09:00 PMHost: Timothy York
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 16 and up
Current students Only!!! This is NOT an open lab.
This is HIGHLY RECOMMENDED additional Lab time for the present course being offered. Instructor will be available if individual help is required.
Project work time and individual help is the focus of these sessions. Alternative methods and tools may be shared during the session.
Use of tools and/or materials without proper authorization is prohibited and may result in failure to or removal from Stained Glass Area authorization.
Stained Glass Class Lab
Time: Nov 18 06:00 PM - 09:00 PMHost: Timothy York
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 16 and up
Current students Only!!! This is NOT an open lab.
This is HIGHLY RECOMMENDED additional Lab time for the present course being offered. Instructor will be available if individual help is required.
Project work time and individual help is the focus of these sessions. Alternative methods and tools may be shared during the session.
Use of tools and/or materials without proper authorization is prohibited and may result in failure to or removal from Stained Glass Area authorization.
Introduction to Stained Glass Session 1 of 3
Time: Nov 06 06:00 PM - 09:00 PMHost: Timothy York
Register: http://makeict.wildapricot.org/event-5910372
Price: MakeICT Members - $60.00
Price: Non-Members - $65.00
Ages: 16 and up
Introduction to designing and building stained glass art projects. Students will learn fundamental safety for handling glass and the basics of designing, cutting, foiling, soldering, framing, and hanging Tiffany style glass art. Flat work, 3-D build, special techniques and finishing will be explored.
Tools available in the glass work area will include basic glass shaping hand tools, grinders, and soldering irons.
Lessons will be a combination of lecture and hands-on training. Lab time will be scheduled within the sessions as optional work periods, but are highly recommended for individual and small group learning of specific topics. A beginning project (including materials) will be given to all students during the initial session, with an additional individual project of the student’s choice, to be completed by the end of the three session class. Materials for the individual project are the responsibility of the class participants. Special pricing or considerations from local sources for materials and tools may be available; check with the instructor for details.
Restrictions:
Due to the nature of the medium and processes being used, no one under the age of sixteen years of age will be allowed in the glass work area without PRIOR approval of the instructor.
Instructor availability:
Typically 30 minutes prior to class session, as well as additional lab hours as published. Additional individual time by specific arrangement only.
Session 1 – 2 instructional hours + 1 hour Lab
I. Class overview
II. brief history of stained glass and its manufacture
III. Safety in the work area and tools
IV. Design overview and special techniques with limited exposure to bevels and jewels
V. Cutting, forming, foiling, and soldering for Beginning project
Please be punctual as a courtesy to others. Enjoy!
UNBOXING THAT CRICUT - INTRO TO PAPER CREATION PART I
Time: Nov 09 10:00 AM - 12:30 PMHost: Gena Profit
Register: http://makeict.wildapricot.org/event-5910546
Price: MakeICT Members - $35.00
Price: Non-Members - $40.00
Ages: 18 and up
Perfect class for those who have purchased a Cricut Maker and those thinking about purchasing a Cricut Maker! Class is scheduled for Saturday, November 9th (1000am to 1230pm). Learn basic overview and various software techniques for a Cricut Maker3 in a hands-on learning environment. We will create a project together from start to finish. It is highly recommended that you bring your own laptop to class. If you do not have a laptop, please email me at gprofitbusiness@gmail.com as soon as possible. We have a few extra laptops at the location that can be utilized.
Also, please download a FREE software called Cricut Design Space on your laptop BEFORE class regardless if you have purchased a Cricut machine. This software can be found on the Cricut website, and it is necessary for the class. All other supplies will be provided.
Gena Profit NL Class and Tour - Private
Time: Nov 09 01:00 PM - 03:00 PMHost: Gena Profit
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 18 and up
Private Class and Tour
UNBOXING THAT CRICUT - INTRO TO PAPER CREATION PART II
Time: Nov 23 10:00 AM - 12:30 PMHost: Gena Profit
Register: http://makeict.wildapricot.org/event-5910554
Price: MakeICT Members - $35.00
Price: Non-Members - $40.00
Ages: 18 and up
Perfect class for those who have purchased a Cricut Maker and those thinking about purchasing a Cricut Maker! Class is scheduled for Saturday, November 23rd (1000am to 1230pm). Learn various intermediate software techniques for a Cricut Maker3 in a hands-on learning environment. We will create a more complex project together from start to finish just in time for the holidays! It is highly recommended that you bring your own laptop to class. If you do not have a laptop, please email me at gprofitbusiness@gmail.com as soon as possible. We have a few extra laptops at the location that can be utilized.
Also, please download a FREE software called Cricut Design Space on your laptop BEFORE class regardless if you have purchased a Cricut machine. This software can be found on the Cricut website, and it is necessary for the class. Most of the supplies will be provided. A detailed email will be sent once registration has been completed.