Event updates for July 2026
Maker Monday
Time: Jul 13 07:00 PM - 09:30 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-6339884
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Maker Monday is our open house event. It’s a great way to experience the makerspace and the maker culture in person. You’ll learn all about our space, tools, policies, people, and how we operate.
Our tours are free and open to the public. While you are welcome to just show up, we prefer that you register in advance so we have enough members on hand to assist with our tours.
You are welcome to hang out and chat after your tour. There’s always something interesting going on at Maker Monday!
To contact our Membership Committee to arrange a tour outside of Maker Mondays, or if you have general questions about joining, send an email to membership@makeict.org.
Maker Monday
Time: Jul 27 07:00 PM - 09:30 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-6339885
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Maker Monday is our open house event. It’s a great way to experience the makerspace and the maker culture in person. You’ll learn all about our space, tools, policies, people, and how we operate.
Our tours are free and open to the public. While you are welcome to just show up, we prefer that you register in advance so we have enough members on hand to assist with our tours.
You are welcome to hang out and chat after your tour. There’s always something interesting going on at Maker Monday!
To contact our Membership Committee to arrange a tour outside of Maker Mondays, or if you have general questions about joining, send an email to membership@makeict.org.
Two-way Radio Operating Session
Time: Jul 13 05:30 PM - 07:30 PMHost: Joe Pajor KB0KFH
Register: http://makeict.wildapricot.org/event-6549002
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 16 to 100
Two-way Radio Operating Sessions are an opportunity for licensed amateur radio operators to operate KS0ICT the club station of the MakeICT Amateur Radio Club of the Two-way Radio Committee of MakeICT. Those who are not yet licensed can attend and get on the air with a licensed operator as the control operator to guide you.
These sessions usually include Maker Mondays to support the facility tour of those events.
Two-way Radio Operating Session
Time: Jul 27 05:30 PM - 07:30 PMHost: Joe Pajor KB0KFH
Register: http://makeict.wildapricot.org/event-6549007
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 16 to 100
Two-way Radio Operating Sessions are an opportunity for licensed amateur radio operators to operate KS0ICT the club station of the MakeICT Amateur Radio Club of the Two-way Radio Committee of MakeICT. Those who are not yet licensed can attend and get on the air with a licensed operator as the control operator to guide you.
These sessions usually include Maker Mondays to support the facility tour of those events.
New Member Orientation Monday
Time: Jul 20 07:00 PM - 09:30 PMHost: Membership Committee
Register: http://makeict.wildapricot.org/event-6578680
Price: MakeICT Members - $0.00
New Member Orientation sessions are required for all new members and exist to familiarize you with the building and the organization. To qualify for this session, you must fit the following requirements:
- Membership profile completed and approved
- Waiver Signed
- Payments are all current
This session will including a short slideshow about MakeICT and then an in-depth tour of the facility. Members will also sit down with a number of leadership and peer members for a brief discussion to allow us to get to know you. At the end of this session, you will get your key to the building so that you can come and go as you please.
https://makeict.wildapricot.org/Sys/Login
SCA Fighting Practice
Time: Jul 05 10:00 AM - 02:00 PMHost: Josh Thompson
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Where: MakeICT - Wichita's Makerspace, 5920 E Mount Vernon St, Wichita, KS 67218, USA
Description: SCA Fighter Practice - Will be Armored and Cut and Thrust. Location will depend on the weather and the number of people we will either be by the big tree, the garden or inside. If anyone has any questions, please feel free to contact our Knight Marshal who runs our practices by email at Knightmarshal@vatavia.calontir.org and/or our Chatelaine, who helps new people at chatelaine@vatavia.calontir.org.
What is the SCA? Check out our website for details at Vatavia.Calontir.org.
The SCA is a historical reenactment organization dedicated to exploring both the broad scope of history and the daily lives of individuals of the pre-17th century world. We bring history to life by immersing ourselves in the clothing, combat, music, art, and sciences of the time. Members have free choice of what areas they will explore. The SCA is expressly welcoming to all people of any race, sex, religion, national origin, gender, sexual orientation, age, or disability.
SCA Fighting Practice
Time: Jul 12 10:00 AM - 02:00 PMHost: Josh Thompson
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Where: MakeICT - Wichita's Makerspace, 5920 E Mount Vernon St, Wichita, KS 67218, USA
Description: SCA Fighter Practice - Will be Armored and Cut and Thrust. Location will depend on the weather and the number of people we will either be by the big tree, the garden or inside. If anyone has any questions, please feel free to contact our Knight Marshal who runs our practices by email at Knightmarshal@vatavia.calontir.org and/or our Chatelaine, who helps new people at chatelaine@vatavia.calontir.org.
What is the SCA? Check out our website for details at Vatavia.Calontir.org.
The SCA is a historical reenactment organization dedicated to exploring both the broad scope of history and the daily lives of individuals of the pre-17th century world. We bring history to life by immersing ourselves in the clothing, combat, music, art, and sciences of the time. Members have free choice of what areas they will explore. The SCA is expressly welcoming to all people of any race, sex, religion, national origin, gender, sexual orientation, age, or disability.
Advanced Stained Glass Session 1 of 3
Time: Jul 08 06:00 PM - 09:00 PMHost: Timothy York
Register: http://makeict.wildapricot.org/event-6710816
Price: MakeICT Members - $60.00
Price: Non-Members - $65.00
Ages: 16 and up
Designing and building of leaded glass art projects in the classical lead came process. Students will learn fundamental safety for handling glass and the basics of designing, cutting, fitting, soldering, framing, and hanging Lead Came style glass art.
Tools available in the glass work area will include basic glass shaping hand tools, grinders, and soldering irons.
Lessons will be a combination of lecture and hands-on training. Lab time will be scheduled within the sessions as optional work periods, but are highly recommended for individual and small group learning of specific topics. A beginning project (including materials) will be given to all students during the initial session, with an optional individual project of the student’s choice, to be created during class. Materials for the optional individual project are the responsibility of the class participants. Special pricing or considerations from local sources for materials and tools may be available; check with the instructor for details.
Restrictions:
Due to the nature of the medium and processes being used, no one under the age of sixteen years of age will be allowed in the glass work area without PRIOR approval of the instructor.
Prerequisite course:
Introduction to Stained Glass or instructor approval
Instructor availability:
Typically 30 minutes prior to class session, as well as additional lab hours as published. Additional individual time by specific arrangement only.
Session 1 – 2 instructional hours + Lab
I. Class overview
II. Safety in the work area and tools
III. Design overview and special techniques including bevels and jewels
IV. Cutting, forming, and soldering for Beginning project
Please be punctual as a courtesy to others. Enjoy!
Advanced Stained Glass Session 2 of 3
Time: Jul 15 06:00 PM - 09:00 PMHost: Timothy York
Price: MakeICT Members - $60.00
Price: Non-Members - $65.00
Ages: 16 and up
Designing and building of leaded glass art projects in the classical lead came process. Students will learn fundamental safety for handling glass and the basics of designing, cutting, fitting, soldering, framing, and hanging Lead Came style glass art.
Tools available in the glass work area will include basic glass shaping hand tools, grinders, and soldering irons.
Lessons will be a combination of lecture and hands-on training. Lab time will be scheduled within the sessions as optional work periods, but are highly recommended for individual and small group learning of specific topics. A beginning project (including materials) will be given to all students during the initial session, with an optional individual project of the student’s choice, to be created during class. Materials for the optional individual project are the responsibility of the class participants. Special pricing or considerations from local sources for materials and tools may be available; check with the instructor for details.
Restrictions:
Due to the nature of the medium and processes being used, no one under the age of sixteen years of age will be allowed in the glass work area without PRIOR approval of the instructor.
Prerequisite course:
Introduction to Stained Glass or instructor approval
Instructor availability:
Typically 30 minutes prior to class session, as well as additional lab hours as published. Additional individual time by specific arrangement only.
Session 2 – 1 hour instruction + Lab
I. Beginning project finishing including packing and sealing
II. Hanging and/or mounting
III. Jigging and fixturing for production
IV. Additional requirements for individual projects
Please be punctual as a courtesy to others. Enjoy!
Advanced Stained Glass Session 3 of 3
Time: Jul 22 06:00 PM - 09:00 PMHost: Timothy York
Price: MakeICT Members - $60.00
Price: Non-Members - $65.00
Ages: 16 and up
Designing and building of leaded glass art projects in the classical lead came process. Students will learn fundamental safety for handling glass and the basics of designing, cutting, fitting, soldering, framing, and hanging Lead Came style glass art.
Tools available in the glass work area will include basic glass shaping hand tools, grinders, and soldering irons.
Lessons will be a combination of lecture and hands-on training. Lab time will be scheduled within the sessions as optional work periods, but are highly recommended for individual and small group learning of specific topics. A beginning project (including materials) will be given to all students during the initial session, with an optional individual project of the student’s choice, to be created during class. Materials for the optional individual project are the responsibility of the class participants. Special pricing or considerations from local sources for materials and tools may be available; check with the instructor for details.
Restrictions:
Due to the nature of the medium and processes being used, no one under the age of sixteen years of age will be allowed in the glass work area without PRIOR approval of the instructor.
Prerequisite course:
Introduction to Stained Glass or instructor approval
Instructor availability:
Typically 30 minutes prior to class session, as well as additional lab hours as published. Additional individual time by specific arrangement only.
Session 3 – 1 hour + 2 hours Lab
I. Show and Tell for individual projects
II. Lessons learned round table discussion
Please be punctual as a courtesy to others. Enjoy!
Stained Glass Class Lab
Time: Jul 20 06:00 PM - 09:00 PMHost: Timothy York
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 16 and up
Current students Only!!! This is NOT an open lab.
This is HIGHLY RECOMMENDED additional Lab time for the present course being offered. Instructor will be available if individual help is required.
Project work time and individual help is the focus of these sessions. Alternative methods and tools may be shared during the session.
Use of tools and/or materials without proper authorization is prohibited and may result in failure to or removal from Stained Glass Area authorization.
Two-way Radio Committee Meeting
Time: Jul 11 01:00 PM - 03:00 PMHost: Joe Pajor KB0KFH
Register: http://makeict.wildapricot.org/event-6548977
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 16 to 100
Two-way Radio Committee meetings are for Committee members and guests to discuss Committee projects and plans. Guests are VERY welcome.
Electronics Meetup
Time: Jul 12 03:00 PM - 05:00 PMHost: Kim Kirwan
Register: http://makeict.wildapricot.org/event-6720686
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 10 and up
Electronics Meetup - Sundays 3pm-5pm. Come and meet other people also interested in electronics. Bring your projects! Bring your questions!
Electronics Meetup
Time: Jul 19 03:00 PM - 05:00 PMHost: Kim Kirwan
Register: http://makeict.wildapricot.org/event-6720687
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 10 and up
Electronics Meetup - Sundays 3pm-5pm. Come and meet other people also interested in electronics. Bring your projects! Bring your questions!
Electronics Meetup
Time: Jul 26 03:00 PM - 05:00 PMHost: Kim Kirwan
Register: http://makeict.wildapricot.org/event-6720688
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 10 and up
Electronics Meetup - Sundays 3pm-5pm. Come and meet other people also interested in electronics. Bring your projects! Bring your questions!
Foam Board RC Airplane Build & Fly (Session 2/3)
Time: Jul 26 02:00 PM - 04:30 PMHost: Ben Yang
Register: http://makeict.wildapricot.org/event-6741651
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 8 to 100
Learn to build and fly your own powered radio-controlled airplane! No prior experience in aviation, electronics, or anything else is required. Your fee will cover everything - tools, materials, instruction, and reusable electronics for one airplane, so feel free to bring yourself and up to three other people; family, friends, partner, kids, whomever you'd like to share the building and flying experience. By the end of the class, you will leave with your own ready to fly RC plane, additional parts for upgrades, and your first flight under your belt so you'll be ready to continue experiencing the hobby on your own!
Details
The airplane:
The plane built in class will be a simple 3 channel RC plane made of pre-cut foam board and hot glue, with additional parts for an advanced 4 channel wing included that can be built on your own time. Replacement parts are simple to make by hand or laser cutter, so if you crash, you can get back up with little effort. In addition, all the electronics are fully reusable and reprogrammable, so you can easily put them in another foam board airplane or design your own!
What's included:
Pre-cut foam board kit, hardware, brushless motor, 20A ESC, pre-programmed ELRS transmitter & 7-channel receiver, 2x li-po battery, battery charger, 4x servos, propeller, full use of tools during class, instruction for building and first flight.
Schedule:
In session 1 there will be a quick introduction and background presentation on the plane and basic theory. You will then practice building techniques, and begin the initial parts of the build. In session 2 you will complete the build, install the electronics, power up to make sure everything works, and if time allows, throw the planes as gliders for basic flying practice. In session 3 we will meet at MakeICT to go over flying basics and rules, do final pre-flight checks, then head out to a local RC field to have your first flight! Each session will run between 2-3 hours, and will be hosted weekly at the same time.
Attendance:
It is highly recommended to make sure you are available for the entire planned period for at least the first two sessions, and if you want a guided first flight with improved chance of success, be present for the third. No refunds will be provided after the start of the first session. Ages 18 and under must be accompanied by an adult.
Disclaimer:
While the class is available to all and no prior experience is required, basic arts and crafts skills and tools are used for the building process. These include things such as razor blades and hot glue guns that might result in injury. The building process itself also requires the ability to follow precise instructions and willingness to commit at least 4 hours over two weeks. As such, while all materials will belong to the attendee to do as they see fit at the beginning of session 1, and instruction will be provided to the best my ability to complete the project, I can not guarantee the creation of a flyable aircraft if instructions aren't followed. Similarly, while the airplane chosen is designed to be as simple to operate as possible, flying a RC airplane requires a certain degree of hand-eye coordination. If you can play a video game you should be fine, but, like before, I am not able to guarantee proficient flying skills to attendees, and as such will not be held responsible for lost or damaged aircraft. This is in no way designed to discourage you from attending the class or trying out the hobby, as chances are it is much easier than you'd expect!
SCA Arts and Science Meetup
Time: Jul 01 07:00 PM - 09:00 PMHost: Josh Thompson
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Where: Make ICT 5920 E Mount Vernon St, Wichita, KS 67218
Description: Meet us at the entrance on the North side of the building. There will be a doorbell on the right side of the door that must be rung to get into the building. Arts & Science meetings are times dedicated to working on projects with members of the barony. Depending on the class schedule, organized classes can also be taught. If anyone has any questions, please feel free to contact our Minister of Arts and Sciences Alicia Niel by email at artsandsciences@vatavia.calontir.org and/or our Chatelaine, who helps new people, Aia Gold-Bearer at chatelaine@vatavia.calontir.org
What is the SCA? Check out our website for details at Vatavia.Calontir.org.
The SCA is a historical reenactment organization dedicated to exploring both the broad scope of history and the daily lives of individuals of the pre-17th century world. We bring history to life by immersing ourselves in the clothing, combat, music, art, and sciences of the time. Members have free choice of what areas they will explore. The SCA is expressly welcoming to all people of any race, sex, religion, national origin, gender, sexual orientation, age, or disability.
Woodshop Safety Class
Time: Jul 18 10:00 AM - 12:00 PMHost: Matthew Cleary
Register: http://makeict.wildapricot.org/event-6744164
Price: MakeICT Members - $0.00
Price: Non-Members - $20.00
Learn the basics to safely operate the major woodshop tools in this safety class, including understanding the limitations of each tool, the forces created when using the tool and how to maintain safe control for improved performance. Tools covered: SawStop table saw, drill press, band saw, router table, jointer, planer, miter saw, oscillating spindle and belt/disk sanders and scroll saw. Expect around an hour and a half of walkthrough with our tools and equipment, followed by a woodshop clean-up.
Prerequisites: Please read the woodshop tool access policy and safety requirements on the wiki page prior to coming to class. https://wiki.makeict.org/wiki/Woodshop_Area
Safety Personal Protective Equipment (PPE): • Mandatory: Closed-toed shoes, eye protection, short sleeves • Advisable: Hearing protection, and a dust mask.
Upon completion of the safety demonstration, you can use this woodshop equipment for your projects whenever you work at MakeICT as a member!
Woodshop Safety Class
Time: Jul 26 02:30 PM - 04:30 PMHost: Matthew Cleary
Register: http://makeict.wildapricot.org/event-6744172
Price: MakeICT Members - $0.00
Price: Non-Members - $20.00
Learn the basics to safely operate the major woodshop tools in this safety class, including understanding the limitations of each tool, the forces created when using the tool and how to maintain safe control for improved performance. Tools covered: SawStop table saw, drill press, band saw, router table, jointer, planer, miter saw, oscillating spindle and belt/disk sanders and scroll saw. Expect around an hour and a half of walkthrough with our tools and equipment, followed by a woodshop clean-up.
Prerequisites: Please read the woodshop tool access policy and safety requirements on the wiki page prior to coming to class. https://wiki.makeict.org/wiki/Woodshop_Area
Safety Personal Protective Equipment (PPE): • Mandatory: Closed-toed shoes, eye protection, short sleeves • Advisable: Hearing protection, and a dust mask.
Upon completion of the safety demonstration, you can use this woodshop equipment for your projects whenever you work at MakeICT as a member!