Event Updates for April 2023

News Event Notifications
1

Event updates for April 2023

9

Ceramics : BasicWheel Throwing And Trimming Part 1 of 2

Time: Apr 10 07:00 PM - 09:00 PM
Host: Scott Sullivan
Register: http://makeict.wildapricot.org/event-5193011
Price: MakeICT Members - $30.00
Price: Non-Members - $35.00
Ages: 16 and up

My name is Scott Sullivan. I am a former co lead of the Ceramics Studio and long-time member. I have been throwing pottery on and off since 1986. I studied ceramics initially in Japan.

This class is a two part class that will be held on a Monday and the immediate following Saturday evening. Attendance at both sessions is necessary.

The first part will go over the basics of throwing a simple pot on the electric pottery wheel. This will include how to set up, tear down, and clean the wheel, as well as an introduction to the basic tools used in pottery throwing.

The second part will be basic instruction on trimming the pot(s) that were thrown in the first part on Monday. This will include basic instruction on using the wheel and trimming tools to clean your pot and put a foot on it.
After you have completed both parts of this class, you will have a piece that will be ready to be bisque fired. After that, you’ll need to come back and glaze your piece so it can be bisque fired. You can do that on your own, or on a Maker Monday or Ceramics Tuesday when there will be folks in the studio who can give you pointers. Glazing is out of scope for this class.

You do not need to bring any materials or tools. Everything will be provided.

You will be working with wet clay and you will get dirty. Please dress appropriately.
10

Ceramics : BasicWheel Throwing And Trimming Part 2 of 2

Time: Apr 15 11:00 AM - 01:00 PM
Host: Scott Sullivan
Register: http://makeict.wildapricot.org/event-5193015
Ages: 16 and up

This class is part two of a two part class. Part one is on the immediately preceding Monday. Attendance at both sessions is necessary. Registration links can be found in part one.

My name is Scott Sullivan. I am a former co lead of the Ceramics Studio and long-time member. I have been throwing pottery on and off since 1986. I studied ceramics initially in Japan.

The first part will go over the basics of throwing a simple pot on the electric pottery wheel. This will include how to set up, tear down, and clean the wheel, as well as an introduction to the basic tools used in pottery throwing.

The second part will be basic instruction on trimming the pot(s) that were thrown in the first part on Monday. This will include basic instruction on using the wheel and trimming tools to clean your pot and put a foot on it.

After you have completed both parts of this class, you will have a piece that will be ready to be bisque fired. After that, you’ll need to come back and glaze your piece so it can be bisque fired. You can do that on your own, or on a Maker Monday or Ceramics Tuesday when there will be folks in the studio who can give you pointers. Glazing is out of scope for this class.

You do not need to bring any materials or tools. Everything will be provided.

You will be working with wet clay and you will get dirty. Please dress appropriately.
11

E-School Visit - Making Games

Time: Apr 12 10:00 AM - 12:00 PM
Host: LaDeana Dockery
Register: http://makeict.wildapricot.org/event-5202644
Price: MakeICT Members - $5.00
Price: Non-Members - $5.00

E-school will visit, tour the space and make games in some of the classrooms.
14

Maker Monday

Time: Apr 10 07:00 PM - 08:30 PM
Host: Membership Committee
Register: http://makeict.wildapricot.org/event-5207048
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00

Maker Monday is our open house event.
It’s a great way to experience the makerspace and the maker culture in person. Come tour our shops and see our brand new facility at 5920 E. Mt. Vernon. You’ll learn all about our makerspace, tools, policies, people, and how we operate.

Our tours are free and open to the public. While you are welcome to just show up, we prefer that you register in advance so we have enough members on hand to assist with our tours. Sessions are at 7.
If you wish to begin your membership at Maker Monday we will have members here to sign you up.
You are welcome to hang out and chat after your tour. There’s always something interesting going on at Maker Monday!
To contact our onboarding team to arrange a tour outside the normal ones on Maker Mondays or general questions about joining, send an email to onboarding@makeict.org.
16

Schrunchie Mania

Time: Apr 10 06:00 PM - 07:00 PM
Host: Malissa Long
Register: http://makeict.wildapricot.org/event-5195617
Price: MakeICT Members - $10.00
Price: Non-Members - $15.00

Make as many scrunchies as you can in an hour. Students will receive enough supplies for 3 scrunchies and a printed instruction sheet to help make more. Basic sewing machine understanding is highly suggested but not required.
19

Advanced Welding(TIG Welding Basics)

Time: Apr 20 05:00 PM - 07:00 PM
Host: John Miranda
Register: http://makeict.wildapricot.org/event-5211297
Price: MakeICT Members - $20.00
Price: Non-Members - $25.00
Ages: 16 and up
Required Authorizations: Metalshop, Mig welding

Tungsten Inert Gas (TIG) welding, is an arc welding process that uses a tungsten electrode to produce a weld. Come to MakeICT to learn how. Participants will become familiar with the TIG Welder and will learn set up, safety, and correct operation while welding steel. MIG Welding authorization in the metal shop is required
20

Hand Plasma Cutter Basics

Time: Apr 19 05:00 PM - 07:00 PM
Host: John Miranda
Register: http://makeict.wildapricot.org/event-5211289
Price: MakeICT Members - $15.00
Price: Non-Members - $20.00
Ages: 16 and up
Required Authorizations: Metalshop

In this class you will learn the functions of the Hypertherm 30XP Plasma Cutter and how to safely operate it. Once you have completed this class you will be authorized to use this piece of equipment and start having fun!
21

Woodturning: Maker Monday Edition

Time: Apr 10 06:30 PM - 08:30 PM
Host: John Nicholas
Register: http://makeict.wildapricot.org/event-5223860
Price: MakeICT Members - $10.00
Price: Non-Members - $15.00
Ages: 12 to 100

Makers should make things on Maker Monday. Turn something simple to find out what woodturning is about.

We will have several experienced woodturners, Members of South Kansas Woodturners, available. This week we will wood pen. Join our Instructor Bill Oden, President of SKW. Turning a pen is the way many woodturners get their start.

We wear Protective Face Shields (Safety) when turning. Dust or Cloth Masks are optional.

Kid Friendly, requires Parent with those under 16.

This exploring Woodturning Class does not qualify for Level 1 Lathe Authorization.
22

Woodturning: Maker Monday Edition

Time: Apr 24 06:30 PM - 09:00 PM
Host: John Nicholas
Register: http://makeict.wildapricot.org/event-5223861
Price: MakeICT Members - $15.00
Price: Non-Members - $20.00
Ages: 12 to 100

Makers should make things on Maker Monday. Turn something simple to find out what woodturning is about.

We will have several experienced woodturners, Members of South Kansas Woodturners, available. This week we will turn a small lidded container. SKW Members are turning containers for the Beads of Courage Program, https://beadsofcourage.org/ . A small lidded container is a great start for this wonderful program. Join our Instructor John Nicholas, Past President of SKW.

We wear Protective Face Shields (Safety) when turning. Dust or Cloth Masks are optional.

Kid Friendly, requires Parent with those under 16.

This exploring Woodturning Class does not qualify for Level 1 Lathe Authorization.
23

One-Color Screen Printing

Time: Apr 17 06:00 PM - 08:00 PM
Host: Doug Wilson
Register: http://makeict.wildapricot.org/event-5227612
Price: MakeICT Members - $20.00
Price: Non-Members - $25.00
Ages: 10 and up

This class will focus on the basics of screen-printing; from choosing a design, exposing a screen, washing out the stencil, and applying the ink to paper. Participants will get the opportunity to practice good screen printing technique by helping to produce a run of 50 wall-worthy prints.

We'll also answer any curiosities you might have regarding multi-color printing, printing on cloth, and obtaining and using other people's artwork.
1 Like
24

ShopBot CNC Using Easel

Time: Apr 16 10:00 AM - 01:00 PM
Host: Doug Wilson
Register: http://makeict.wildapricot.org/event-5227613
Price: MakeICT Members - $25.00
Price: Non-Members - $30.00
Ages: 16 and up
Required Authorizations: Woodshop

This class is for those interested in using the CNC ShopBot in the woodshop. During the class, students will design a wooden ring on Easel.com and carve out said ring on the ShopBot. Carving on the ShopBot is quick and accurate, so each person will have the chance to operate the ShopBot themselves and take home a small token of their hard work.
26

Metal Lathe Basics

Time: Apr 08 12:00 PM - 01:30 PM
Host: Rustin Atkeisson
Register: http://makeict.wildapricot.org/event-5228753
Price: MakeICT Members - $19.00
Price: Non-Members - $24.00
Ages: 16 and up
Required Authorizations: Metalshop

Metal Lathe Basics will cover the basic parts of the metal lathe while also going thru the proper use and operation of the Craftsman and Logan metal lathes.
The end project will include basic operations such as facing and parting as well as knurling and adding internal threading.
Safety glasses are required.
27

Metalshop Safety Class

Time: Apr 25 06:00 PM - 07:30 PM
Host: Rustin Atkeisson
Register: http://makeict.wildapricot.org/event-5228754
Price: MakeICT Members - $0.00
Price: Non-Members - $20.00
Ages: 16 and up

The Metalshop Safety Class will cover basic safety for working in both the Hot room and Cold room for the Metalshop at MakeICT, as well as some basic expectations. The following tools will be covered :
Pipe bender
Tubing roller
Metal shear
Large and small sheet metal brakes
Drill press
Hand grinders
Horizontal band saw
Vertical band saw
Chop Saw
Other equipment not listed may require further authorization. This class is required before taking most other metalworking classes or workshops.
Safety glasses are available but we recommend bringing your own if you can.
28

Herbology (Gardening) 101: Soil Success: Profiting from Preparation

Time: Apr 08 12:00 PM - 02:00 PM
Host: Sherry Ibrahim
Register: http://makeict.wildapricot.org/event-5229070
Price: MakeICT Members - $5.00
Price: Non-Members - $10.00
Ages: 9 to 120

We will review the basics of soil components, qualities, and purposes and discuss soil amendment options to improve your gardening success. Samples provided in the classroom so you can feel the differences.
29

Herbology 102: Watering Wins - Surviving Droughts the Lazy Way

Time: Apr 23 01:00 PM - 03:00 PM
Host: Sherry Ibrahim
Register: http://makeict.wildapricot.org/event-5229086
Price: MakeICT Members - $5.00
Price: Non-Members - $10.00
Ages: 9 to 120

Major causes of plant deaths include both under- and over-watering. In this class we will discuss the most efficient watering methods for both potted as well as in ground plants of various moisture needs.
30

Metalshop Safety Class

Time: Apr 01 10:00 AM - 11:30 AM
Host: Rustin Atkeisson
Register: http://makeict.wildapricot.org/event-5228752
Price: MakeICT Members - $0.00
Price: Non-Members - $20.00
Ages: 16 and up

The Metalshop Safety Class will cover basic safety for working in both the Hot room and Cold room for the Metalshop at MakeICT, as well as some basic expectations. The following tools will be covered :
Pipe bender
Tubing roller
Metal shear
Large and small sheet metal brakes
Drill press
Hand grinders
Horizontal band saw
Vertical band saw
Chop Saw
Other equipment not listed may require further authorization. This class is required before taking most other metalworking classes or workshops.
Safety glasses are available but we recommend bringing your own if you can.
31

Laser Cutting Basics

Time: Apr 15 02:00 PM - 04:00 PM
Host: Christian Kindel
Register: http://makeict.wildapricot.org/event-5243085
Price: MakeICT Members - $20.00
Price: Non-Members - $25.00

This class will teach participants how to use the 80 watt CO2 laser cutters at MakeICT. We will be using the LightBurn software to create and cut a simple project.

Participants will learn the capabilities of the laser cutter, machine and material safety, and operation of the machine in Cartesian (flat) mode. All participants will complete a small project to practice running the machine.

Please bring a USB flash drive if you have one. Completion of this class grants the necessary authorization to use the laser cutter.
32

3D Printing Basics

Time: Apr 22 02:00 PM - 04:00 PM
Host: Christian Kindel
Register: http://makeict.wildapricot.org/event-5243088
Price: MakeICT Members - $20.00
Price: Non-Members - $25.00
Ages: 12 and up

Learn the basics of 3D printing and how to use the printers at MakeICT!

We'll cover how 3D printing works, materials used in 3D printing, importing 3D files into slicer software, and important techniques for successful printing. Each participant will get a chance to practice with the software and print a small object to take home. Sample models will be provided, but participants may also bring in an STL file of a small (~3cm3) object to try out.

Completion of this class will grant authorization for using the 3D printers at MakeICT.
36

Intro To House Plants

Time: Apr 22 10:00 AM - 10:30 AM
Host: Beniah Crossette
Register: http://makeict.wildapricot.org/event-5243463
Price: MakeICT Members - $0.00
Price: Non-Members - $5.00

This time at Intro 2 house plants, we’ll be taking an in-depth look at the Monstera Deliciosa.