Logan's EPIC Magic Wheelchair Halloween!


#180

I was looking for other options just in case we had a balance issue.


#181

Probably something we’ll need to watch, for sure. I’m thinking we’ll have some control over weight by where we put components, especially the battery or batteries, although I hope that the total weight remains pretty low.


#182

Can I get a show of hands from those who are planning on going to meet Logan and his family in Oklahoma this afternoon? Planning on leaving from MakeICT around 2:45 pm.


#183

Me for sure. I’m also happy to drive my car or anyone else’s for all or part of the trip.


#184

We’ll definitely want to keep an eye on that issue. I thought I might bring our mock-up along today to compare it with the actual chair.


#185

Very good.


#186

Does anybody have a (full-size) 4gb or smaller SD card that we can use?

We’re using an Adafruit WAV/audio shield to generate sound effects. It only supports FAT16 formatted SD cards, which have a maximum size of 4gb. I only have micro SD cards that are larger than 8gb+, and even though I’ve formatted a 4gb FAT16 partition on one, the Arduino fails to read it. I have an adapter for micro cards, but if anyone has a full-size card that’s 4gb or smaller, it would be good to eliminate another variable.


#187

Dom,
I have a 1GB card right here in my hand. I’ll bring it with me this afternoon.


#188

I started a github project so that we can track revisions and better share our designs with the rest of the world.

Right now it just has (the start) of some Arduino code, but we should include our art, CAD designs, and any other digital assets that we can. I’ll be at the meeting tonight if anyone needs help adding them to the github project. If you prefer, you can also just give me your files and I can add them to the project for you.


#189

Please, take good pictures and notes, as I’m at the State Fair.


#190

Sorry to leave everyone high and dry tonight – I was pretty far gone. I’ll be sharing the latest photos from Oklahoma as soon as possible. Again, I’m really sorry. I had every intention of being there tonight, and even got down there early. I wouldn’t have missed if I thought I could have avoided it.


#191

I took additional wheelchair photos on Saturday.


#192

@Malissa, I spoke to Shelly (Logan’s grandmother), and she said that you could call her directly about costumes for her or Logan, sizes, whatever. Get with me privately and I’ll give you her cell.


#193

David, we glued some foam last night. The adhesive is not up to par. Was okay for sanding and such. But when moving back to the front we noticed delamnation. We need think of another glue. I tried weld wood contact cement and had severe melting. Thoughts?


#194

It could have been that we didn’t use enough super 77?

@Malissa im not sure everyone who was helping last night, but the ones with me were Jerry, Barbara, Roz and Rick. Combined we put in about 7.5 hrs. :smiley:


#195

I got some ‘Iron grip silicone adhesive’ and some ‘gorilla glue’. Both test strips are on my bench drying. I will have a report this afternoon.


#196

Okay both setup and held equally tightly. The white gorilla glue did setup the quickest and would be my choice. Both are silicone based. I will bring both down tomorrow. The wood shop has a class tonight. So I will not be there.


#197

If you’re getting good results with white Gorilla glue, that will work for me. Let me know where I can get some and I’ll pick up a gallon.


#198

We use Super 77 at work all the time without issue. Here’s how we do it spray both surfaces to be adhered, let dry for at least 1 min then press them together. I’ve had military drawings call for this on computer equipment cases.


#199

I have been out of town the past couple meetings–Sorry! Do we still need the fittings in ceramic to mold plastic over? I will be at the next meeting but I will also be at the maker space during the day and most days before it gets dark from here on out, so I can get those made if they are still needed.