SCA Fighting Practice
Time: Jun 07 10:00 AM - 02:00 PM
Host: Josh Thompson
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Where: MakeICT - Wichita's Makerspace, 5920 E Mount Vernon St, Wichita, KS 67218, USA
Description: SCA Fighter Practice - Will be Armored and Cut and Thrust. Location will depend on the weather and the number of people we will either be by the big tree, the garden or inside. If anyone has any questions, please feel free to contact our Knight Marshal Yurik Randulfson by email at Knightmarshal@vatavia.calontir.org and/or our Chatelaine, who helps new people, Aia Gold-Bearer at chatelaine@vatavia.calontir.org
What is the SCA? Check out our website for details at Vatavia.Calontir.org.
The SCA is a historical reenactment organization dedicated to exploring both the broad scope of history and the daily lives of individuals of the pre-17th century world. We bring history to life by immersing ourselves in the clothing, combat, music, art, and sciences of the time. Members have free choice of what areas they will explore. The SCA is expressly welcoming to all people of any race, sex, religion, national origin, gender, sexual orientation, age, or disability.
SCA Arts and Science Meetup
Time: Jun 10 07:00 PM - 09:00 PM
Host: Josh Thompson
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Where: Make ICT 5920 E Mount Vernon St, Wichita, KS 67218
Description: Meet us at the entrance on the North side of the building. There will be a doorbell on the right side of the door that must be rung to get into the building. Arts & Science meetings are times dedicated to working on projects with members of the barony. Depending on the class schedule, organized classes can also be taught. If anyone has any questions, please feel free to contact our Minister of Arts and Sciences Alicia Niel by email at artsandsciences@vatavia.calontir.org and/or our Chatelaine, who helps new people, Aia Gold-Bearer at chatelaine@vatavia.calontir.org
What is the SCA? Check out our website for details at Vatavia.Calontir.org.
The SCA is a historical reenactment organization dedicated to exploring both the broad scope of history and the daily lives of individuals of the pre-17th century world. We bring history to life by immersing ourselves in the clothing, combat, music, art, and sciences of the time. Members have free choice of what areas they will explore. The SCA is expressly welcoming to all people of any race, sex, religion, national origin, gender, sexual orientation, age, or disability.
SCA Fighting Practice
Time: Jun 28 10:00 AM - 02:00 PM
Host: Josh Thompson
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Where: MakeICT - Wichita's Makerspace, 5920 E Mount Vernon St, Wichita, KS 67218, USA
Description: SCA Fighter Practice - Will be Armored and Cut and Thrust. Location will depend on the weather and the number of people we will either be by the big tree, the garden or inside. If anyone has any questions, please feel free to contact our Knight Marshal Yurik Randulfson by email at Knightmarshal@vatavia.calontir.org and/or our Chatelaine, who helps new people, Aia Gold-Bearer at chatelaine@vatavia.calontir.org
What is the SCA? Check out our website for details at Vatavia.Calontir.org.
The SCA is a historical reenactment organization dedicated to exploring both the broad scope of history and the daily lives of individuals of the pre-17th century world. We bring history to life by immersing ourselves in the clothing, combat, music, art, and sciences of the time. Members have free choice of what areas they will explore. The SCA is expressly welcoming to all people of any race, sex, religion, national origin, gender, sexual orientation, age, or disability.
Stained Glass Class Lab
Time: Jun 01 06:00 PM - 09:00 PM
Host: Timothy York and/or Marissa Ray
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 16 and up
Current students Only!!! This is NOT an open lab.
This is HIGHLY RECOMMENDED additional Lab time for the present course being offered. Instructor will be available if individual help is required.
Project work time and individual help is the focus of these sessions. Alternative methods and tools may be shared during the session.
Use of tools and/or materials without proper authorization is prohibited and may result in failure to or removal from Stained Glass Area authorization.
Woodturning: Maker Monday Edition - Pen turning
Time: Jun 08 06:30 PM - 08:30 PM
Host: Shawn Neumann
Register: http://makeict.wildapricot.org/event-6710542Price: MakeICT Members - $20.00
Price: Non-Members - $25.00
Ages: 12 to 100
Makers should make things on Maker Monday. Turn something simple to find out what woodturning is about. This class will be turning a working ink pen.
This class is taught by a member of South Kansas Woodturners. This week each students will get an opportunity to create their own simple spindle turning project that they can take home with them to show friends and family. We will go over safety practices, characteristics of wood, and introduction to woodturning tools and technique. Join Shawn Neumann, member of SKW.
Class fees cover everything needed (wood blanks, necessary tools, and instruction).
We wear Protective Face Shields (Safety) when turning. Dust or Cloth Masks are optional.
Kid Friendly, requires Parent with those under 16.
This exploring Woodturning Class does not require Woodshop Safety or Lathe Authorization.
Woodturning: Maker Monday Edition - Pen turning
Time: Jun 22 06:30 PM - 08:30 PM
Host: Shawn Neumann
Register: http://makeict.wildapricot.org/event-6710548Price: MakeICT Members - $20.00
Price: Non-Members - $25.00
Ages: 12 to 100
Makers should make things on Maker Monday. Turn something simple to find out what woodturning is about. This class will be turning a working ink pen.
This class is taught by a member of South Kansas Woodturners. This week each students will get an opportunity to create their own simple spindle turning project that they can take home with them to show friends and family. We will go over safety practices, characteristics of wood, and introduction to woodturning tools and technique. Join Shawn Neumann, member of SKW.
Class fees cover everything needed (wood blanks, necessary tools, and instruction).
We wear Protective Face Shields (Safety) when turning. Dust or Cloth Masks are optional.
Kid Friendly, requires Parent with those under 16.
This exploring Woodturning Class does not require Woodshop Safety or Lathe Authorization.
Board Member Basics
Time: Jun 04 07:30 PM - 08:30 PM
Host: Rustin Atkeisson
Register: http://makeict.wildapricot.org/event-6711095Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 16 and up
Join Rustin Atkeisson (past everyother board position) after a board workshop to learn what it takes to be a board member and get a better idea of what expectations there are.
This is also an opportunity to pick the brains of other board members and their expereinces this past year.
If you are on the fence about running for the board, or are thinking about nominating someone, this is a good time to address your concerns.
SCA Arts and Science Meetup
Time: Jun 03 07:00 PM - 09:00 PM
Host: Josh Thompson
Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Where: Make ICT 5920 E Mount Vernon St, Wichita, KS 67218
Description: Meet us at the entrance on the North side of the building. There will be a doorbell on the right side of the door that must be rung to get into the building. Arts & Science meetings are times dedicated to working on projects with members of the barony. Depending on the class schedule, organized classes can also be taught. If anyone has any questions, please feel free to contact our Minister of Arts and Sciences Alicia Niel by email at artsandsciences@vatavia.calontir.org and/or our Chatelaine, who helps new people, Aia Gold-Bearer at chatelaine@vatavia.calontir.org
What is the SCA? Check out our website for details at Vatavia.Calontir.org.
The SCA is a historical reenactment organization dedicated to exploring both the broad scope of history and the daily lives of individuals of the pre-17th century world. We bring history to life by immersing ourselves in the clothing, combat, music, art, and sciences of the time. Members have free choice of what areas they will explore. The SCA is expressly welcoming to all people of any race, sex, religion, national origin, gender, sexual orientation, age, or disability.
Ceramics - Hand Building Part 2 - Glaze Session
Time: Jun 05 06:00 PM - 08:30 PM
Host: Jennifer Cabala
Register: http://makeict.wildapricot.org/event-6716091Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
This is the 2nd session of hand building classes. We will use the hard top table in the ceramics room.
Ceramics - Hand Building Part 2 - Glaze Session
Time: Jun 09 05:30 PM - 08:00 PM
Host: Jennifer Cabala
Register: http://makeict.wildapricot.org/event-6720019Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
This is the 2nd session of hand building classes. We will use the hard top table in the ceramics room.
Two-way Radio Committee Meeting
Time: Jun 13 01:00 PM - 03:00 PM
Host: Joe Pajor KB0KFH
Register: http://makeict.wildapricot.org/event-6548976Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 16 to 100
Two-way Radio Committee meetings are for Committee members and guests to discuss Committee projects and plans. Guests are VERY welcome.
Electronics Meetup
Time: Jun 14 03:00 PM - 05:00 PM
Host: Kim Kirwan
Register: http://makeict.wildapricot.org/event-6720460Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 10 and up
Electronics Meetup - Sundays 3pm-5pm. Come and meet other people also interested in electronics. Bring your projects! Bring your questions!
Electronics Meetup
Time: Jun 21 03:00 PM - 05:00 PM
Host: Kim Kirwan
Register: http://makeict.wildapricot.org/event-6720462Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 10 and up
Electronics Meetup - Sundays 3pm-5pm. Come and meet other people also interested in electronics. Bring your projects! Bring your questions!
Electronics Meetup
Time: Jun 28 03:00 PM - 05:00 PM
Host: Kim Kirwan
Register: http://makeict.wildapricot.org/event-6720463Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 10 and up
Electronics Meetup - Sundays 3pm-5pm. Come and meet other people also interested in electronics. Bring your projects! Bring your questions!
Woodshop Safety Class
Time: Jun 14 02:00 PM - 04:00 PM
Host: Matthew Cleary
Register: http://makeict.wildapricot.org/event-6721022Price: MakeICT Members - $0.00
Price: Non-Members - $20.00
Learn the basics to safely operate the major woodshop tools in this safety class, including understanding the limitations of each tool, the forces created when using the tool and how to maintain safe control for improved performance. Tools covered: SawStop table saw, drill press, band saw, router table, jointer, planer, miter saw, oscillating spindle and belt/disk sanders and scroll saw. Expect around an hour of walkthrough with our tools and equipment, followed by an OPTIONAL hour of hands-on practice with the tools aimed at those who have little or no practice with woodworking tools.
Prerequisites: Please read the woodshop tool access policy and safety requirements on the wiki page prior to coming to class. Safety Personal Protective Equipment (PPE): • Mandatory: Closed-toed shoes, eye protection, short sleeves • Advisable: Hearing protection.
Upon completion of the safety demonstration, you can use this woodshop equipment for your projects whenever you work at MakeICT as a member!
3D Printing Basics (Snapmaker Edition)
Time: Jun 29 06:00 PM - 08:00 PM
Host: Paul Shackelford
Register: http://makeict.wildapricot.org/event-6721874Price: MakeICT Members - $25.00
Price: Non-Members - $30.00
Ages: 10 and up
Learn the basics of 3D printing and how to use the filament printers at MakeICT!
(Note: Resin printing is a separate class, keep on the lookout for those)
We'll cover how 3D printing works, materials used in 3D printing, importing 3D files into slicer software, and important techniques for successful printing. Each participant will get a chance to practice with the software and print a small object to take home. Sample models will be provided, but participants may also bring in an STL file of a small (~3cm
3) object to try out.
Completion of this class will grant authorization for using the filament 3D printers at MakeICT.
This class requires you to bring your own laptop. Please install the latest version of Snapmaker Orca (https://www.snapmaker.com/snapmaker-orca).
Manual Milling Basics
Time: Jun 13 12:00 PM - 02:30 PM
Host: John Cummings
Register: http://makeict.wildapricot.org/event-6724913Price: MakeICT Members - $29.00
Price: Non-Members - $34.00
Ages: 16 and up
Required Authorizations: Metalshop
Manual Mill Basics will cover the basic parts of a manual mill while also going thru proper use and operation of the EMCO manual mill.
The end project will include basic operations such as facing, squaring, drilling, and counter boring.
Safety glasses are required.
Metalshop Safety must be completed before signing up for this class.
Metalshop Safety Class
Time: Jun 13 09:00 AM - 10:30 AM
Host: John Cummings
Register: http://makeict.wildapricot.org/event-6724911Price: MakeICT Members - $0.00
Price: Non-Members - $20.00
Ages: 16 and up
The Metalshop Safety Class will cover basic safety for working in both the Hot room and Cold room for the Metalshop at MakeICT, as well as some basic expectations. The following tools will be covered :
Pipe bender
Tubing roller
Metal shear
Large and small sheet metal brakes
Drill press
Hand grinders
Horizontal band saw
Vertical band saw
Chop Saw
Other equipment not listed may require further authorization. This class is required before taking most other metalworking classes or workshops.
Safety glasses are available but we recommend bringing your own if you can.
Laser Cutting Basics
Time: Jun 16 07:00 PM - 09:00 PM
Host: Ben Yang
Register: http://makeict.wildapricot.org/event-6719989Price: MakeICT Members - $20.00
Price: Non-Members - $25.00
Ages: 12 and up
Learn to use the 80 watt CO2 laser cutters at MakeICT. We will discuss the capabilities of the machines, safety rules, and operation in flat mode. Participants will complete a small project using Inkscape and LightBurn software.
Intermediate computer proficiency is recommended. Users should be comfortable with web browsing, Windows file folder navigation, copy and paste shortcut keys, and mouse operation.
CNC Plasma Cutting Basics
Time: Jun 18 07:00 PM - 08:30 PM
Host: David Hanson
Register: http://makeict.wildapricot.org/event-6729305Price: MakeICT Members - $20.00
Price: Non-Members - $25.00
Ages: 16 and up
Required Authorizations: Metalshop
This class will go over the safe operation of the CNC plasma cutter. After this is done each user will operate the plasma table and cut out a design.
This class will not cover any of the design or program (G-code) generation. A sample program will be provided.
More information on the CNC plasma cutter can be found on the wiki along with videos to setup Fusion360 for use with the CNC plasma cutter at MakeICT: https://wiki.makeict.org/wiki/CNC_Plasma_Cutter
Please wear appropriate clothing for the class. I encourage the use of PPE, of course. While it is common to find people, myself included, hot work in short sleeves and shorts, it is not a best practice, so for the purposes of encouraging safe hot work, I would like everybody to wear the following if possible.
Long sleeve shirt - preferably not synthetic
Long pants - preferably not synthetic
Closed-toe, leather footwear