How to teach a class at MakeICT
Time: Apr 16 06:00 PM - 07:30 PM
Host: LaDeana Dockery
Register: http://makeict.wildapricot.org/event-5692021Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Class for people wanting to teach a class at MakeICT. We learn how to propose a class, how to check in students, how to use the projector and answer any other questions you might have!
1 Like
SCA Educational Meeting
Time: Apr 10 06:00 PM - 09:00 PM
Host: Amy Dyke
Register: http://makeict.wildapricot.org/event-5677010Price: MakeICT Members - $0.00
Price: Non-Members - $0.00
Ages: 16 and up
Society of Creative Anachronism hosts this educational meeting.
Only full members of the SCA are allowed to participate in combat, but MakeICT members are welcome to observe.
Pancakebot/Artsy Pancakes
Time: Apr 13 08:00 AM - 10:00 AM
Host: LaDeana Dockery
Register: http://makeict.wildapricot.org/event-5692150Price: MakeICT Members - $5.00
Price: Non-Members - $10.00
Ages: 16 and up
Learn how to use the pancakebot to create pancakes. We will also try doing some art-y pancakes using food color and squirt bottles.
We will also go into how to use the pancake painter so we can make our own designs.
1 Like
New Member Orientation
Time: Apr 30 06:00 PM - 08:30 PM
Host: Membership Committee
Register: http://makeict.wildapricot.org/event-5695053Price: MakeICT Members - $0.00
New Member Orientation sessions are required for all new members and exist to familiarize you with the building and the organization. To qualify for this session, you must fit the following requirements:
- Membership profile completed and approved
- Waiver Signed
- Payments are all current
This session will including a short slideshow about MakeICT and then an in-depth tour of the facility. Members will also sit down with a number of leadership and peer members for a brief discussion to allow us to get to know you. At the end of this session, you will get your key to the building so that you can come and go as you please.
https://makeict.wildapricot.org/Sys/Login
Woodshop Authorization
Time: Apr 24 07:00 PM - 10:00 PM
Host: Aaron Rivers
Register: http://makeict.wildapricot.org/event-5702070Price: MakeICT Members - $0.00
Price: Non-Members - $20.00
Learn the basics to safely operate the major woodshop tools in this safety class including understanding the limitations of each tool, the forces created when using the tool and how to maintain safe control for improved performance. Tools covered: SawStop table saw, drill press, band saw, router table, jointer, planer, miter saw, oscillating spindle and belt / disk sanders and scroll saw. Expect at least two hours of walkthrough with our tools and equipment, followed by an OPTIONAL hour of hands on practice with the tools aimed at those who have little or no practice with woodworking tools
Prerequisites: Please read the woodshop tool access policy and safety requirements on the wiki page prior to coming to class. Safety Personal Protective Equipment (PPE): • Mandatory: Closed-toed shoes, eye protection, short sleeves • Advisable: Hearing protection
Upon completion of the safety demonstration you can use this woodshop equipment for your projects whenever you work at MakeICT as a member!
Instructor may be slightly late. Please call if you get worried, number is posted in woodshop. Thanks!
1 Like
Woodshop Authorization
Time: Apr 28 03:00 PM - 06:00 PM
Host: Aaron Rivers
Register: http://makeict.wildapricot.org/event-5702071Price: MakeICT Members - $0.00
Price: Non-Members - $20.00
Learn the basics to safely operate the major woodshop tools in this safety class including understanding the limitations of each tool, the forces created when using the tool and how to maintain safe control for improved performance. Tools covered: SawStop table saw, drill press, band saw, router table, jointer, planer, miter saw, oscillating spindle and belt / disk sanders and scroll saw. Expect at least two hours of walkthrough with our tools and equipment, followed by an OPTIONAL hour of hands on practice with the tools aimed at those who have little or no practice with woodworking tools
Prerequisites: Please read the woodshop tool access policy and safety requirements on the wiki page prior to coming to class. Safety Personal Protective Equipment (PPE): • Mandatory: Closed-toed shoes, eye protection, short sleeves • Advisable: Hearing protection
Upon completion of the safety demonstration you can use this woodshop equipment for your projects whenever you work at MakeICT as a member!
Instructor may be slightly late. Please call if you get worried, number is posted in woodshop. Thanks!
1 Like
Woodshop Hazardous Materials Authorization
Time: Apr 28 06:00 PM - 08:00 PM
Host: Aaron Rivers
Register: http://makeict.wildapricot.org/event-5702072Price: MakeICT Members - $0.00
Price: Non-Members - $5.00
Ages: 16 and up
Learn to use exotic materials safely in our shared space. Participants will learn how to clean re-claimed wood, test for lead paint, and adequately clean up after the use of exotic woods. Once authorized, participants will be allowed to use exotic woods in the woodshop at any time. Expect to get dirty. Participants are encouraged to bring respirators if they have one, though dust masks will be provided.
*This CAN be taken before being authorized for the woodshop, though the use of the tools in the space would still require Woodshop Authorization.
The instructor of this class may be slightly late. If so please be patient, if more than 5 minutes have passed or your just very anxious then use his phone number (posted in the woodshop) to call and confirm he is in route.
1 Like
Basic Fusion 360 (part 1 of 2)
Time: Apr 28 08:00 PM - 10:00 PM
Host: LaDeana Dockery
Register: http://makeict.wildapricot.org/event-5692034Price: MakeICT Members - $15.00
Price: Non-Members - $20.00
Ages: 16 and up
This is an introduction to fusion focusing on building 2D sketches. This class will be 2 days long, each being a 2 hour class. You will only register for the first class, but will be expected to attend both. If you have a laptop you will be using, bring it along. Extra points if you download fusion on it. :)
The first day will include
* Creating and editing sketches
* Panning, zooming, rotation
* Creating sketch elements like lines, curves, circles
* Trimming and offsetting sketch elements
* Constraints
The second day will include
* Parameters
* Extrude
* Any project you bring
Basic Fusion 360 (part 2 of 2)
Time: Apr 30 07:00 PM - 09:00 PM
Host: LaDeana Dockery
Price: MakeICT Members - $15.00
Price: Non-Members - $20.00
Ages: 16 and up
see day 1